Stihl TS 410 Service Workshop Manual

$0.00

Stihl TS 410 Service Workshop Manual for the TS410 cut off saw. View free page images online or download full PDF with images, diagrams and information. Print or save to any suitable device.
Download PDF Manual

Stihl TS 410 Service Workshop Manual Repair

Stihl TS 410 Service Workshop Manual for the Repair and service of TS410 Cut Off Saw/concrete Saw. The PDF manual has diagrams and detailed information to troubleshoot and repair the trimmer. View free page images online or download a full digital PDF that you can easily save, print or view on all devices from mobiles, tablets or computers.

What’s covered in the Stihl TS 410 Workshop Manual

PDF manuals cover every subject with detailed descriptions of repair and servicing methods specific to the TS410 quick-cut cutoff saw, including troubleshooting the carburetor, Engine, Throttle, clutch, Cylinder, Piston, fuel, Starter and the ignition system. Complete disassembly and assembly of all parts are described in detail.

Detailed Description of Stihl TS 410 Workshop Manual

Specifications, Troubleshooting Chart, Carburetor removal and installation, Carburetor Repair, Clutch, Pistons, Engine, Ignition system, Starter, Tightening Torques, Servicing, Controls, Throttle Control, Muffler, Fuel System, Flywheel, Shaft, Attachments and Special Tools.

This manual helps you with the information you need quickly and easily.

Stihl TS 410 Saw Specifications

TS 410 ENGINE Single-cylinder two-stroke engine

Displacement (Capacity): 4.07 cu. in. (66.7 cm3)
Power Performance: 4.3 hp (3.2 kW) at 9000 rpm
Bore: 1.97 in. (50 mm)
Stroke: 1.34 in. (34 mm)
Idle speed: 2500 rpm
Maximum spindle speed: 5350 rpm

TS 410 Fuel System

All position diaphragm carburetor with an integral fuel pump
Power Source: Gas/Petrol
Fuel tank capacity: 24.0 oz (0.71 l)

TS 410 Ignition System

Electronic magneto ignition
Spark plug (resistor type): Bosch WSR 6 F
Electrode gap: 0.5 mm (0.02 in)

TS 410 Weight

Empty weight without cutting wheel,
with electronic water control, without
fuel: 21.8 lbs (9.9 kg)

Cutting wheels

The quoted maximum permissible operating speed of the cutting wheel must be greater than or equal to the maximum spindle speed of the cut-off machine used.

Cutting wheels

Outside diameter: 12 in. (300 mm)
Hole diameter/spindle diameter: 0.787 in. (20 mm)
Tightening torque: 22 lbf ft (30 Nm)

Stihl TS 410 Service Workshop Manual PDF

* Online preview

Reviews

There are no reviews yet.

Be the first to review “Stihl TS 410 Service Workshop Manual”

Your email address will not be published. Required fields are marked *