Husqvarna 160S Specifications

Husqvarna 160S Specifications

The Husqvarna 160S chainsaw, a rugged and reliable tool, has been a trusted companion to professional loggers and homeowners alike since its introduction in February 1971. This powerful saw was manufactured by Husqvarna Vapenfabriks AB in Huskvarna, Sweden, and boasts an impressive 58cc engine with a single cylinder and chrome-plated aluminum bore.

Weighing in at 7.1 kg (15.6 lbs.) with a 32 cm (13 in.) bar and chain, the 160S is designed for one-man operation and features a rigid handlebar system. With an automatic, adjustable oil pump and a Tillotson HS-123A, B series carburetor. The 160S was discontinued at an unknown date, but its reputation as a hard-working and reliable saw lives on.

Specifications Chart

Manufactured byHusqvarna Vapenfabriks AB, Huskvarna, Sweden
Series or assembly number
Year introducedFebruary 1971
Year discontinued
Engine displacement58 cc (3.53 cu. in.)
Number of cylinders1
Cylinder bore45 mm (1.77 in.)
Piston stroke36 mm (1.41 in.)
Piston ring thickness1.5 mm
Cylinder typeAluminum with chrome plated bore
Intake methodPiston ported
Manufacturer advertised HPNot advertised
Weight7.1 kg (15.6 lbs.) with 32 cm (13 in.) bar and chain
Operator configurationOne-man operation
Handlebar systemRigid
Chain brakeNone
Drive typeDirect
ConstructionDie-cast magnesium
Magneto typeBosch KC1
CarburetorTillotson HS-123A, B series
Major repair kitRK-23HS
Minor repair kitDG-5HS/T
Air filter systemNylon mesh element
Starter typeAutomatic rewind
Oil pumpAutomatic, adjustable
Maximum engine RPM8,000
Idle RPM2,500-2,800 RPM
Ignition timingFixed
Breaker point setting
Flywheel/coil air gapPosition is fixed
Spark plug typeBosch WKA 175T36, Champion CJ8
Spark plug gap0.5 mm (0.020 in.)
Crankshaft main bearingsBall
Fuel tank capacity800 ml (27 fl. oz.)
Fuel oil ratio25:1
Recommended fuel octaneRegular
Mix oil specificationTwo-cycle chain saw mix oil
Chain pitch3/8 in.
Chain type
Bar mount pattern17 link
Shortest guide bar supplied32 cm (13 in.)
Longest guide bar supplied50 cm (20 in.)
Colour schemeHusqvarna Orange enamel, black handles
Paint codes
Illustrated parts list
Service manual
Husqvarna 160S Chainsaw Specs

In conclusion, the Husqvarna 160S chainsaw was a powerful and reliable tool manufactured by Husqvarna Vapenfabriks AB in Huskvarna, Sweden. Its introduction in February 1971 marked a significant advancement in chainsaw technology, and it quickly became a favorite among professional loggers and arborists. With a 58cc engine displacement and an aluminum cylinder with a chrome-plated bore, the 160S was a force to be reckoned with. With a rigid handlebar system and automatic oil pump. The 160S was produced for an unknown number of years before being discontinued. Despite being out of production, the Husqvarna 160S remains a cherished tool among collectors and chainsaw enthusiasts alike.

Leave a Reply

Your email address will not be published. Required fields are marked *

Works On Any Device

Customer Help

Check email for validation link

No purchase necessary