Husqvarna 50 Specifications

Husqvarna 50 Specifications

The Husqvarna 50 chainsaw was a popular model produced by Husqvarna Vapenfabriks AB in Huskvarna, Sweden. It was introduced in 1985 and quickly became a favorite among homeowners and professional loggers alike. With a powerful 48.7ccm (2.92 cu. in.) engine and sturdy die-cast magnesium construction, the Husqvarna 50 was a reliable and efficient tool for cutting through trees of all sizes.

It also featured an anti-vibration handlebar system and a chain brake for added safety. However, this model is no longer in production and has been discontinued by the manufacturer. Nonetheless, the Husqvarna 50 remains a beloved piece of equipment for many who appreciate its durability and performance.

Specifications Chart

Manufactured byHusqvarna Vapenfabriks AB, Huskvarna, Sweden
Year introduced1985
Engine displacement48.7ccm (2.92 cu. in.)
Cylinder bore44mm (1.73 in.)
Piston stroke32mm (1.26 in.)
Cylinder typeAluminum with Chrome plated bore
Intake methodPiston ported
Weight5.9 kg with 32 cm bar & chain (13 lbs. with 13 in.)
Handlebar systemAnti-vibration
Chain brakeYes
Drive TypeDirect
ConstructionDie-cast Magnesium
Magneto typeElectronic
CarburetorWalbro WA-82A series
Major repair kitK10-WAT
Minor repair kitD10-WAT
Air filter systemNylon mesh cartridge
Starter typeHusqvarna automatic rewind
Oil pumpAutomatic, adjustable
Maximum engine RPM8,400 under load, 12,500 free
Idle RPM2,500
Ignition timingfixed
Breaker point settingnone
Flywheel/coil air gap0.3 mm (0.012 in.)
Spark plug typeBosch WS7F, Champion CJ7Y
Spark plug gap0.5mm (0.020 in.)
Crankshaft main bearingsBall
Fuel tank capacity600 ml (1.27 pints)
Fuel oil ratio40:1
Recommended fuel octaneRegular
Mix oil specificationHusqvarna oil or two-stroke chain saw mix oil
Chain pitch.325 in.
Chain typeOregon 21LG
Bar mount pattern01 link
Shortest guide bar supplied33cm (13 in.)
Longest guide bar supplied50cm (20 in.)
Color schemeHusqvarna Orange
Illustrated parts listYes
Service manualYes
Husqvarna 50 Chainsaw Specs

In conclusion, the Husqvarna 50 chainsaw was a popular model that was introduced in 1985 and was manufactured by Husqvarna Vapenfabriks AB in Huskvarna, Sweden. It had an engine displacement of 48.7ccm, a weight of 5.9 kg with a 32 cm bar and chain, and featured an anti-vibration handlebar system, a chain brake, and a centrifugal clutch.

The chainsaw was powered by an automatic, adjustable oil pump and had a maximum engine RPM of 8,400 under load and 12,500 free. Despite being no longer in production, the Husqvarna 50 remains a popular choice for those seeking a reliable and powerful chainsaw for their needs, if you can find it in the secondhand market


One comment

  1. adrian

    Husqvarna 50 Specifications is what I was looking for s I have an old saw picked up at a garage sale…Thanks

Leave a Reply

Your email address will not be published. Required fields are marked *

Works On Any Device

Customer Help

Check email for validation link

No purchase necessary

error: Content is protected !!