Husqvarna 240 E Workshop Manual

$0.00

Husqvarna 240 E Workshop Manual for the service and repair of the Husqvarna 240 E chainsaw. View pages online or download a complete PDF manual with clear easy to understand images, diagrams and information. Print or save to any device.

Husqvarna 240 E Workshop Manual Repair

Husqvarna 240 E Workshop Manual for the Repair and service of the Husqvarna 240 E chainsaw. The PDF workshop service manual has accurate, easy to understand information and diagrams to help repair and service the chainsaw. Service Information to help you to troubleshoot, repair and fix the Husqvarna 240 E chainsaw. View pages online or download a complete PDF service manual that you can easily save, print or view on any device.

Husqvarna 240 E Workshop Manual Contents

Contents, Introduction, Safety Regulations, Symbols, Technical data, Service tools, Service data, Safety equipment, Starter, Electrical system, Centrifugal clutch, Lubrication system, Carburetor, Tank unit, Anti-vibration system, Piston and cylinder, Crankcase and crankshaft, Troubleshooting, Repair Instructions.

Carburetor – General Chainsaw Adjustment

Adjusting the carburettor involves adjusting the engine to the local conditions e.g. climate, altitude, fuel and type of two-stroke oil. The carburettor is equipped with three adjustment options.
L = Low speed jet
H = High speed jet
T = Idling adjustment screw

The L and H jets adjust the fuel flow to match the airflow that the throttle valve opening allows. Turning them clockwise makes the fuel/air mixture weaker (less fuel in relation to the amount of air) and turning them anti-clockwise makes the fuel/air mixture richer. A weak mixture increases the engine speed and a rich mixture decreases the engine speed. The T screw controls the throttle position when idling. Turning the T screw clockwise gives faster idling; turning it anti-clockwise lowers idling speed (see manual for complete guide).

See the complete service workshop manual, carburetor manual, parts list, operator manual and technical supplements PDF downloads. Also the repair and service articles available on this website for more information on how to service, repair and find parts for the chainsaw.

Husqvarna 240 E Chainsaw Specifications

Cylinder displacement : 38.2 cm³ / 2.3 cu.inch
Power output : 1.5 kW / 2 hp(I)
HorsePower : 2 HP (M)s
Idling Speed : 3000 RPM
Max Speed : 9000 RMP
Cyclinder Bore : 40 mm / 1.57 Inch
Cyclinder Stroke : 32 mm 1.26 Inch
Ignition System : IIDA
Ignition Module Air Gap : 0.3 mm / 0.01 Inch
Spark Plug : Champion RCJ 7Y
Carburettor Model : ZAMA W-33
Fuel Tank Size : 0.3 Lit
Oil Tank Size : 0.2 Lit
Oil Pump Type : Fixed Flow
Oil Pump Capacity : 8.8 ML / Min
Recommended Bar : 33 – 40 cm ( 13 Inch to 16 Inch )
Chain Speed @ Max Power : 16.3 M/S
Vibration Level : 2.1/2.7 m/s²
Sound Pressure (Operator) : 100.7 dB(A)
Sound Power Level : 113 dB(A)
Weight ( Excl. Cutting Equipment ) : 4.7 Kg

Read the Husqvarna 240 E Workshop Manual for more chainsaw specs.

Ideal for jobs like pruning, lighter cutting tasks & hobby work.

Husqvarna 240 E Workshop Manual PDF

Reviews

There are no reviews yet.

Be the first to review “Husqvarna 240 E Workshop Manual”

Your email address will not be published. Required fields are marked *