Husqvarna 268 Workshop Manual Repair
Husqvarna 268 Workshop Manual for the Repair and service of the Husqvarna 268 chainsaw. The PDF workshop service manual has accurate, easy to understand information and diagrams to help repair and service the chainsaw. Service Information to help you to troubleshoot, repair and fix the Husqvarna 268 chainsaw. View pages online or download a complete PDF service manual that you can easily save, print or view on any device.
Husqvarna 268 Workshop Manual Contents
Contents, Introduction, Safety Regulations, Symbols, Technical data, Service tools, Service data, Safety equipment, Starter, Electrical system, Centrifugal clutch, Lubrication system, Carburetor, Tank unit, Anti-vibration system, Piston and cylinder, Crankcase and crankshaft, Troubleshooting, Repair Instructions.
Carburetor – General Chainsaw Adjustment
Adjusting the carburettor involves adjusting the engine to the local conditions e.g. climate, altitude, fuel and type of two-stroke oil. The carburettor is equipped with three adjustment options.
L = Low speed jet
H = High speed jet
T = Idling adjustment screw
The L and H jets adjust the fuel flow to match the airflow that the throttle valve opening allows. Turning them clockwise makes the fuel/air mixture weaker (less fuel in relation to the amount of air) and turning them anti-clockwise makes the fuel/air mixture richer. A weak mixture increases the engine speed and a rich mixture decreases the engine speed. The T screw controls the throttle position when idling. Turning the T screw clockwise gives faster idling; turning it anti-clockwise lowers idling speed (see manual for complete guide).
See the complete service workshop manual, carburetor manual, parts list, operator manual and technical supplements PDF downloads. Also the repair and service articles available on this website for more information on how to service, repair and find parts for the chainsaw.
Husqvarna 268 Chainsaw Specifications
Engine displacement: 67 cc (4.1 cu. in.)
Cylinder bore: 50 mm (1.97 in.)
Piston stroke: 34 mm (1.34 in.)
Weight: 13.7 lbs.
fuel tank capacity (L): 0.75
oil capacity (L): 0.45
noise level (dB): 116.00
chain pitch: 3/8
Oil pump automatic, adjustable
Read the Husqvarna 268 Workshop Manual for more chainsaw specs.
The 268 chainsaw is an alloy chassis that was built to last, and run strong when properly tuned. Most had a Tillotson carb that can still be ordered new. Easy to handle, starts easy, plenty of power for fire wood collecting, yet still light enough for use around the garden.
Husqvarna 268 Workshop Manual PDF
* Online preview
There are no reviews yet.