Husqvarna 36 Repair Manual
Husqvarna 36 Workshop Manual for the Husqvarna chainsaw. Repair and service the 36 with this manual. The manual has diagrams and accurate information as used by mechanics and repair shops to troubleshoot and repair the chainsaw.
View free page images online or download a full PDF that you can print or view on any suitable device.
The manuals have plenty of pictures and diagrams to help with repairs and servicing. May be used as a guide for other models as they may share key components such as motors.
Husqvarna 36 Workshop Manual Contents
The index may vary with model number
Introduction, Specifications, Troubleshooting, Attachments, Air Filter, Carburetor, Crankcase, Clutch, Engine, Ignition, Starter, Servicing, Controls, Fuel System, Electrics, Special Tools.
This PDF manual helps you find the information you need quickly and easily. it provides a detailed description of procedures for troubleshooting, repair and testing of the chain saw.
Husqvarna 36 Chainsaw Specifications
YEAR INTRODUCED: 1991
YEAR DISCONTINUED: 1997
ENGINE DISPLACEMENT: 36cc (2.2 cu. in.)
CYLINDER BORE: 38mm (1.50 in.)
PISTON STROKE: 32mm (1.26 in.)
CYLINDER TYPE: Aluminum with a chrome-plated bore
INTAKE METHOD: Piston ported
MANUFACTURER ADVERTISED H.P.: 2.2 hp (1.6kW)
WEIGHT: 4.6kg (10.1 lbs.) powerhead only
CHAIN BRAKE: Inertia activated
DRIVE TYPE: Direct
CONSTRUCTION: Die-cast magnesium and plastic
MAGNETO TYPE: Electronic, Phelon
CARBURETOR: Walbro WT-202, 239 series, ZAMA C1Q-W5, C1Q-W6
MAJOR REPAIR KIT: K20-WAT for Walbro, RB-38 for ZAMA
MINOR REPAIR KIT: D10-WAT for Walbro, GND-27 for ZAMA
AIR FILTER SYSTEM: Cellulose fiber cartridge
STARTER TYPE: Automatic rewind
OIL PUMP: Automatic, non-adjustable
MAXIMUM ENGINE RPM: 13,000 max free after break in, 9,000 under load.
IDLE RPM: 3,000
IGNITION TIMING: fixed
BREAKER POINT SETTING: none
FLYWHEEL/COIL AIR GAP: 0.30 mm (0.012 in.)
SPARK PLUG TYPE: Champion RCJ7Y or Bosch WSR6F
SPARK PLUG GAP: 0.5mm (0.020 in.)
CRANKSHAFT MAIN BEARINGS: Ball
FUEL TANK CAPACITY: 410ml (13.8 oz.)
FUEL OIL RATIO: 50:1
RECOMMENDED FUEL OCTANE: Regular
MIX OIL SPECIFICATION: Two-stroke chain saw mix oil, 50:1 with Husqvarna mix oil
CHAIN PITCH: 3/8 in. low profile
SHORTEST GUIDE BAR SUPPLIED: 33 cm (13 in.)
LONGEST GUIDE BAR SUPPLIED: 45 cm (18 in.)
Husqvarna 36 Workshop Manual PDF
* Online preview