Husqvarna 461 Workshop Manual


Husqvarna 461 Workshop Manual for the service and repair of the Husqvarna 461 chainsaw. View pages online or download a complete PDF manual with clear easy to understand images, diagrams and information. Print or save to any device.


Husqvarna 461 Workshop Manual Repair

Husqvarna 461 Workshop Manual for the Repair and service of the Husqvarna 461 chainsaw (including 461 Rancher). The PDF workshop service manual has accurate, easy to understand information and diagrams to help repair and service the chainsaw. Service Information to help you to troubleshoot, repair and fix the Husqvarna 461 chainsaw. View pages online or download a complete PDF service manual that you can easily save, print or view on any device.

Husqvarna 461 Workshop Manual Contents

Contents, Introduction, Safety Regulations, Symbols, Technical data, Service tools, Service data, Safety equipment, Starter, Electrical system, Centrifugal clutch, Lubrication system, Carburetor, Tank unit, Anti-vibration system, Piston and cylinder, Crankcase and crankshaft, Troubleshooting, Repair Instructions.


Carburetor – General Chainsaw Adjustment

Adjusting the carburettor involves adjusting the engine to the local conditions e.g. climate, altitude, fuel and type of two-stroke oil. The carburettor is equipped with three adjustment options.
L = Low speed jet
H = High speed jet
T = Idling adjustment screw

The L and H jets adjust the fuel flow to match the airflow that the throttle valve opening allows. Turning them clockwise makes the fuel/air mixture weaker (less fuel in relation to the amount of air) and turning them anti-clockwise makes the fuel/air mixture richer. A weak mixture increases the engine speed and a rich mixture decreases the engine speed. The T screw controls the throttle position when idling. Turning the T screw clockwise gives faster idling; turning it anti-clockwise lowers idling speed (see manual for complete guide).

See the complete service workshop manual, carburetor manual, parts list, operator manual and technical supplements PDF downloads. Also the repair and service articles available on this website for more information on how to service, repair and find parts for the chainsaw.

Husqvarna 461 Chainsaw Specifications


Cylinder volume 60.3 cm³ / 3.8 in³
Power output 2.7 kW / 3.7 hp(I)
idle speed 2700 rpm
Maximum power speed 9000 rpm
Cylinder diameter 49mm
working movement 34mm
ignition system SEM AM50
Ignition module air gap 0.3mm / 0.01″
Spark plug Champion RCJ 7Y
electrode aperture 0.5mm / 0.02″
Carburetor model name HS 254B
Fuel tank volume 0.44 liters
Oil tank volume 0.32 liters
Oil pump type Adjustable flow
Oil pump capacity 3-12 ml/min

Cutting Equipment

sprocket 3/8″
Recommended guide length, min-max 38-60cm / 15″-24″
Chain speed at maximum power 18.4 m/s / 60.37 fts

Emission, vibration, and noise data

Equivalent vibration level (ahv , eq) front / rear handle 4.7/7.6 m/s²
Noise pressure level in the user’s ear 112dB(A)
Guaranteed noise power level, LWA 114dB(A)

General dimensions

Weight (excluding cutting equipment) 5.8kg

Read the Husqvarna 461 Workshop Manual for more chainsaw specs.

The Husky 461 chainsaw, one of the most elusive chainsaws to be able to buy. The Husqvarna 461 chainsaw goes for a fortune if you can get your hands on one. Most of these saws are kept safely hidden away by collectors and are rarely used for any actual practical wood cutting work!


Husqvarna 461 Workshop Manual PDF


There are no reviews yet.

Be the first to review “Husqvarna 461 Workshop Manual”

Your email address will not be published. Required fields are marked *