Husqvarna 592 XP Workshop Service Manual


Husqvarna 592 XP Workshop Manual for the service and repair of the Husqvarna 592 XP chainsaw. View pages online or download a complete PDF manual with clear easy to understand images, diagrams and information. Print or save to any device.


Husqvarna 592 XP Workshop Service Manual Repair

Husqvarna 592 XP Workshop Service Manual for the Repair of the Husqvarna 592 XP. The PDF workshop service manual has accurate, easy to understand information and diagrams to help repair and service the chainsaw. Service Information to help you to troubleshoot, repair and fix the Husqvarna 592 XP chainsaw. View pages online or download a complete PDF service manual that you can easily save, print or view on any device.

Husqvarna 592 XP Workshop Service Manual Contents

Contents, Introduction, Safety Regulations, Symbols, Technical data, Service tools, Service data, Safety equipment, Starter, Electrical system, Centrifugal clutch, Lubrication system, Carburetor, Tank unit, Anti-vibration system, Piston and cylinder, Crankcase and crankshaft, Troubleshooting, Repair Instructions.


Husqvarna 592 XP Chainsaw Specifications

Bar length (inch) 24 in
Chain speed at 133% of maximum engine power speed 30.6 m/s
Chain speed at max power 23 m/s
Pitch 3/8″
Recommended bar length, max 36 in
Recommended bar length, max 90 cm
Recommended bar length, min 18 in
Recommended bar length, min 45 cm
Cylinder bore 55 mm
Cylinder displacement 92.7 cm³
Cylinder stroke 39 mm
Electrode gap 0.5 mm
Fuel consumption 462 g/kWh
Fuel tank volume 0.86 l
Idling speed 2800 rpm
Ignition module air gap 0.3 mm
Maximum power speed 9600 rpm
Power output 5.6 kW
Power source Petrol
Spark plug NGK CMR6H
Torque, max. 5.87 Nm
Equivalent vibration level (ahv, eq) front handle 6.6 m/s²
Equivalent vibration level (ahv, eq) rear handle 5.3 m/s²
Oil pump type Adjustable flow, no flow at idle
Oil tank volume 0.42 l
 Sound and Noise
Sound power level, guaranteed (LWA) 119 dB(A)
Sound power level, measured 118 dB(A)
Sound pressure level at operators ear 112 dB(A)
Weight (excl. cutting equipment) 7.4 kg

Read the Husqvarna 592 XP Workshop Manual for more chainsaw specs.

The Husky 592 XP chainsaw is a 90cc petrol chainsaw that has been specially developed for professional arborists, forestry workers and tree surgeons. It offers well-balanced manoeurvability, heavy-duty performance and best-in-class cutting capacity.

Bar Length from 20″ to 36″

Husqvarna 592 XP is equipped with AutoTune 3.0, meaning that the engine settings are constantly optimised for maximum performance, whatever the conditions or temperature of the engine. This is new starting technology that makes the 592 XP more reliable.

Easy starts and vital reliability
The starting procedure is simplified and only one starting procedure is required no matter the conditions, or the temperature of the engine, which further improves the reliability. Additionally, it’s equipped with a heavy-duty air filter with rubber sealing and a robust crankcase that handles bars of up to 36″.

Husqvarna 592 XP Auto Tune Reset

Start the chainsaw and run it in the Cold start position for at least 90 seconds.
• Do not touch the throttle or accelerate the saw during this time.
• After 90 seconds, the machine should be switched off
• Your saw is now re-calibrated and ready to use.



  • 90cc petrol engine
  • High power output
  • Low weight
  • Low vibrations
  • Better chip ejection means less clogging
  • Optimised balace
  • Best in class cutting capacity
  • Best in class power-to-weight
  • Excellent cooling capacity for a longer engine life
  • Extremely powerful X-Torq engine
  • X-Tough light bar
  • Robust crankcase (handles bars of up to 36″)
  • State-of-the-art heavy duty air filtration system with rubber sealing
  • Air injection filters 98% of incoming dust
  • Powerful X-Torq engine
  • AutoTune 3.0 settings always optimized for easy starting and performance
  • Great power-to-weight ratio – when compared with other 90cc saws
  • Easy starting – a single starting procedure
  • Service connector – for easier diagnostics with software
  • Integrated Connectivity Device – can be fitted under the cylinder
  • Improved chip ejection – means less chance of jamming or clogging while cutting
  • Lightweight muffler – brings the overall weight at the front down
  • Captive bar nuts and screws – means you won’t lose your screws or nuts in the woods
  • Flip-up tank caps – really easy to open and close tightly
  • Best filtration system – heavy duty filter for longer work hours
  • Air injection filters – removes 98% of dust
  • Quick acceleration – due to the low weight
  • Visible fuel level – to easily check how much fuel is left in the tank
  • Adjustable oil pump – to regulate depending on temperatures

Husqvarna 592 XP Workshop Manual PDF


There are no reviews yet.

Be the first to review “Husqvarna 592 XP Workshop Service Manual”

Your email address will not be published. Required fields are marked *