Stihl 009 Service Workshop Manual

$0.00

Stihl 009 Service Workshop Manual for the 09 chainsaw. View free page images online or download full PDF containing clear images, diagrams and information. Print or save to any suitable device.
Download PDF Manual

Stihl 009 Service Workshop Manual Repair

Stihl 009 Service Workshop Manual for the Repair and service of 009 chainsaws. The PDF manual has diagrams and detailed information to troubleshoot and repair the chainsaw. View free page images online or download a full digital PDF that you can easily save, print or view on all devices.

Stihl 009 Service Workshop Manual Contents

Introduction, Specifications, Troubleshooting Attachments, Clutch, Engine, Ignition, Starter, Servicing, Controls, Fuel System, Special Tools.

The Stihl 009 PDF manual contains very detailed diagrams and descriptions. Very clear and precise diagrams and instructions. These manuals are designed to get the information you need quickly and easily.

Stihl 009 Specifications

ENGINE DISPLACEMENT: 36.6 ccm (2.23 in.)
CYLINDER BORE: 36 mm (1.42 in.)
PISTON STROKE: 36 mm (1.42 in.)
INTAKE METHOD: Piston ported
MANUFACTURER ADVERTISED H.P.: 1.6
WEIGHT: 4.3 kg with 30 cm bar & chain, 9.5 lbs. with 12 in. bar & chain

MAXIMUM ENGINE RPM: 10,500
IDLE RPM: 2,800
IGNITION TIMING: 1.8 to 2.0 mm (0.071 to 0.079 in.) before TDC
BREAKER POINT SETTING: none
FLYWHEEL/COIL AIR GAP: 0.15 to 0.20 mm (0.006 to 0.008 in.)
SPARK PLUG TYPE: Bosch WSR6F, Champion RCJ7Y
SPARK PLUG GAP: 0.5 mm (0.020 in.)
CRANKSHAFT MAIN BEARINGS: Caged needle roller
FUEL TANK CAPACITY: 250 ml 8.4 fl. oz.)
FUEL OIL RATIO: 40:1 with Stihl oil
RECOMMENDED FUEL OCTANE: Regular
MIX OIL SPECIFICATION: Stihl two-cycle chain saw mix oil
CHAIN PITCH: 3/8 in. Picco (low profile)

Contents of Stihl 009 Service Workshop Manual

Introduction, Specifications, Clutch, Engine, Ignition system, Rewind starter, Throttle control, Fuel system, Carburettor, Av system, Shaft, Cutting tool drive, Support frame, Special servicing tools and aids

Stihl 009 Chainsaw Specifications

First year of production: 1993, Displacement: 37 cc (2.26 cu. in.), Fuel mix: 40:1 with Stihl 2 cycle oil, Standard Cylinder Diameter: 36 mm (1.42 in.), Piston stroke: 36 mm (1.42 in.), Cylinder construction: chrome-plated aluminum, Crankcase construction: cast magnesium.

Stihl 009 Service Workshop Manual PDF

* Online preview

Reviews

There are no reviews yet.

Be the first to review “Stihl 009 Service Workshop Manual”

Your email address will not be published. Required fields are marked *