Stihl 084 Parts Identification
Stihl 084 Parts List for the correct identification of all component parts of the Stihl 84 chainsaw. PDF full version download available, containing clear diagrams and information to assist in the chainsaw workshop parts identification. The service manual is also available from this website.
The Stihl 084 is a slightly modified version of the Stihl 088. It is lighter but with the same power. It went into production in 1986 but is no longer made today. the 088 has a manual oiler pump on it. this saw was designed to accept the largest bars available. You can run anything from 21″ to 60″+ bars on this saw, Stihl’s largest chainsaw (Now the MS880).
In the 1990s, Stihl redesigned the 084 to create the 088. The new 088 had an improved ignition coil design which eliminated the 084’s biggest weakness. Another 084 weakness which was eventually fixed in the 088 lines was to install a steel crankshaft bearing insert in the bar side of the crankcase. Only the late-model 088’s have this feature.
Later Stihl renamed the 088 to the MS880. However, all major parts remained the same. The MS880 does have a different carburetor to comply with newer emissions requirements.
ENGINE DISPLACEMENT:121.6 ccm (7.42 cu. in.)
NUMBER OF CYLINDERS:1
CYLINDER BORE:60 mm
PISTON STROKE:43 mm
MANUFACTURER ADVERTISED H.P.:8.2 B.H.P.
CLUTCH: DRIVE TYPE:
CARBURETOR:Tillotson HT-1A, 2B, 3A, 7A
MAJOR REPAIR KIT: RK-1HT for 1A, 2B, 3A
RK-3HT for 7A
MINOR REPAIR KIT:DG-1HT for 1A, 2B, 3A
DG-7HS/T for 7A
MAXIMUM ENGINE RPM:12,000
Stated horsepower: 7.9
Fuel mix: 50:1 with Stihl 2 cycle oil
Standard Cylinder Diameter: 60 mm
Cylinder construction: chrome-plated aluminum
Crankcase construction: cast magnesium
Standard chain pitch: 3/8″ standard
Contents of Stihl 084 parts list
Introduction, Specifications, Clutch, Engine, Cutting tool drive, Support frame, Special servicing tools and aids, Ignition system, Rewind starter, Throttle control, Fuel system, Carburettor, Av system, Shaft.
File Format: PDF
Stihl 084 Parts List PDF
* Online preview