Zenoah 2500 OPS Parts List

$0.00

Zenoah 2500 OPS Chainsaw Parts List FREE PDF download has all the part numbers for the Zenoah chainsaw. You can use the PDF parts list to help repair your chainsaw, showing an exploded view of the Zenoah 2500 OPS and an indexed list of all chainsaw parts.

Zenoah 2500 OPS Parts List

Zenoah 2500 OPS Parts List, check for the parts online or download a complete illustrated parts list (IPL), showing an exploded view of the Zenoah 2500 OPS chainsaw and an indexed list of all named parts. Chainsaw parts breakdown PDF.

Looking for a Zenoah 2500 OPS chainsaw parts list? Look no further! You can easily download a free PDF manual or view it online to get access to all the information you need. With detailed diagrams and part numbers, this parts list will help you identify and order the parts you need to keep your chainsaw running smoothly.

Whether you’re a professional tree surgeon or a DIY enthusiast, having a reliable parts list at your fingertips is essential. So why wait? Download the Zenoah 2500 OPS chainsaw parts list today and take the first step toward keeping your chainsaw in top condition!

Zenoah 2500 OPS Parts List

All Zenoah Chainsaw parts numbers with clear identification and diagrams:

Zenoah 2500 OPS Parts List Contents

including (depending on the model)

Crankshaft, Cylinder, Oil pump, Clutch, Chain sprocket cover, Chain Brake, Chain sprocket cover, Ignition armature, Flywheel, Fan housing, Starter cover, Carburetor, Air filter, Extras, Carburetor, Handle frame, Handlebar, Tools, Extras, Chain sprocket cover, Brake shoe, Driving disc.

Zenoah 2500 OPS Parts List PDF download has every chainsaw part identification and order number for the chainsaw. You can use these to help repair your Zenoah chainsaw.

PDF Download for Zenoah Chainsaw Parts List

For models: 2500 OPS for models: (all years)

Zenoah 2500 OPS chainsaw Workshop Service Manual and Operators Manual as well as Zenoah 2500 OPS repair articles are also available.

Zenoah Chainsaw Information: Basic parts (General)

1. Front and or Rear Handles: For holding on tight and keeping control of your chainsaw.

2. Chain Brake Lever and Front Hand Guard: Engages the chain brake and immediately stops the chain.

3. Bar Retaining Nuts: Hold the guide bar in place.

4. Tension Adjustment Screw: For adjusting your chain tension.

5. ON/OFF Switch: Must be in the ON position to start. Turning to OFF immediately stops the chainsaw engine.

6. Primer: Releases fuel into the carburetor for easier starting.

7. Choke Lever: Activates the choke for starting.

8. Air Filter: Prevents sawdust and such from getting in your engine.

9. Bucking Spike: Helps to provide stability and leverage.

10. Starter Handle: For starting the engine.

11. Throttle Lockout: Prevents your chainsaw from accidentally starting

12. Throttle Control Trigger: Start and stop trigger

13. Fuel Tank: Mixed fuel goes here.

14. Chain Oil Reservoir: Chain oil goes here to help lubricate the chainsaw chain as it runs.

15. Guide Bar and Bar Tip: Support and guide the chainsaw chain.

16. Saw Chain: This does the cutting.

How to Start and Stop Your Zenoah Chainsaw (General Information Guide)

Before starting:

– Remove all children and pets from the area.

– Make sure the chainsaw has fuel.

– Check the chain tension– Ensure the bar chain oil reservoir is filled.

– Ensure the Fuel tank is filled with a 40:1 fuel mix.

To Start:

1. Set the chainsaw on the ground and disengage the chain brake.

2. Switch to ON.

4. Press primer (for those with one).

5. Pull the choke knob out (do not touch the throttle control).

6. Hold the front handle with the left hand, and step on the boot loop with the right foot.

7. Pull the starter rope 5X.

8. Push the choke knob in and pull the starter rope 3-5X more to start.

9. Chain will be spinning at a fast idle – press throttle lockout and release the trigger to stop the chain.

10. Let it warm up for 30 seconds – 1 minute.

11. Press the throttle lockout and squeeze the trigger to cut.

To Stop:

1. Release throttle control.

2. Switch to STOP.

3. Wait for the chain to come to a complete stop.

4. EMERGENCY STOPPING: push the chain brake lever and hand guard forward, then move the switch to the STOP position.

View Zenoah 2500 OPS Parts List PDF

* Online preview

Reviews

There are no reviews yet.

Be the first to review “Zenoah 2500 OPS Parts List”

Your email address will not be published. Required fields are marked *