Stihl MS 440 C Service Workshop Manual And Repair Guide
Stihl MS 440 C Service Workshop Manual for the Repair and service of the Stihl MS440C (including Magnum) chainsaw. The PDF manual has diagrams and accurate information to troubleshoot and repair the chainsaw. View free page images online or download a full PDF that you can print or view on any suitable device.
The contents of the PDF manuals cover every subject with detailed descriptions of repair and servicing procedures specific to the MS 440 C saw including troubleshooting the carburetor, clutch, fuel, and the ignition system. Complete disassembly and assembly of all parts are described in detail.
Model MS 440W is with warm handle and model MS 440C is with Comfort feature.
Stihl MS 440 C Service Workshop Manual Contents
Introduction, Specifications, Troubleshooting Attachments, Clutch, Chain Brake, Engine, Ignition system, Starter, Servicing, Controls, Fuel System, Special Tools.
Stihl MS 440 C Chainsaw Specifications
Displacement: 70.7 cc (4.3 cu in)
Engine Power: 4 kW (5.4 bhp)
Weight: 6.6 kg (14.8 lbs)
Fuel Capacity: 780 cc (26.4 oz)
Power The peak power output of the MS 440 C STIHL Magnum is 5.4HP, 64% more powerful than the average competitor.
Powerhead Weight It weighs 13.9 lbs, 2.7 lbs more than a typical chainsaw.
Minimum Chain Bar Length This model is compatible with bars as short as 16 inches long.
Maximum Chain Bar Length This model is compatible with bars as long as 32 inches long.
Spark plugs: Bosch WSR6F Spark Plug, Champion RCJ6Y Spark Plug, NGK BPMR7A Spark Plug.
Stihl MS 440 C Carburetor can be replaced with the following Walbro carbs: Walbro Carburetor Models
HD-15B (MS440, MS440W, MS440C and MS440WVH) HD-17A (MS440 Magnum and MS440 Magnum R)
MS440C: RSCBar length 40 cm, MS 440, RSCBar length 45cm, MS 440, Bar length 50cm.
Decompression valve
The decompression valve is part of the easy start-system. The valve should be pressed before starting to cut the compression pressure when starting, as well as the effort needed to pull the starter rope. The decompression valve is semi-automatic, meaning that it must be pressed manually before starting, but then closes automatically.
Compensator
This controller in the carburettor prevents the fuel-air mixture from getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn’t need to be cleaned until an appreciable drop in power occurs.
All important functions such as start, choke, throttle and stop are operated via a single lever.
Stihl MS 440 C Service Workshop PDF
* Online preview
Reviews
There are no reviews yet.