Stihl FS 240 C Service Workshop Manual

Stihl FS 240 C Service Workshop Manual Repair

Stihl FS 240 C Service Workshop Manual for the Repair and service of FS240C Trimmer/brushcutter. The PDF manual has diagrams and detailed information to troubleshoot and repair the trimmer. View free page images online or download a full digital PDF that you can easily save, print or view on all devices from mobiles, tablets or computers.

What’s covered in the Stihl FS 240 C Workshop Manual

PDF manuals cover every subject with detailed descriptions of repair and servicing methods specific to the FS240C trimmer including troubleshooting the carburetor, Engine, Throttle, clutch, Cylinder, Piston, fuel, Starter, and the ignition system. Complete disassembly and assembly of all parts are described in detail.

Detailed Description of the Stihl FS 240 C Workshop Manual

Specifications, Troubleshooting Chart, Carburetor removal and installation, Carburetor Repair, Clutch, Pistons, Engine, Ignition system, Starter, Tightening Torques, Servicing, Controls, Throttle Control, Muffler, Fuel System, Flywheel, Shaft, Attachments, and Special Tools.

This manual helps you with the information you need quickly and easily.

Workshop Manual suitable for the FS 240, FS 240 C, FS 240 R,  and FS 240 C-E

Stihl FS 240 C Trimmer Specifications

Single cylinder two-stroke engine Carburetor: WTF-5, WTF-6
Version with bike handle

FS240C ENGINE

Displacement (Capacity): 37.7 cc (2.30 cu.in)
Power Performance: 1.7 kW (2.3 bhp) at 8,500 rpm
Engine power to ISO 8893: 1.7 kW (2.3 bhp) at 8,500 rpm
Idle speed: 2,800 rpm
Cut-off speed (rated): 12,500 rpm
Max. output shaft speed (cutting attachment): 9,360 rpm
Displacement: 37.7 cm3
Bore: 40.0 mm
Stroke: 30.0 mm

FS240C Ignition System

Electronic magneto ignition
Spark plug (resistor type): NGK CMR 6 H, BOSCH USR 4AC
Electrode gap: 0.5 mm (0.020 in)

FS240C Fuel System

All position diaphragm carburetor with an integral fuel pump
Fuel tank capacity: 0.75 l (25.4 fl.oz)

FS240C Weight

Dry, without cutting attachment and deflector: 7.0 kg (15.4 lbs)
FS240 Overall length
without cutting attachment: 1805 mm (71.06 in)

DG and P screws are fitted in plastic and light alloy metal parts. These screws form a permanent thread when they are installed for the first time. The material is permanently deformed. Screws can be removed and installed as often as necessary without impairing the strength of the screwed assembly, provided that the specified tightening torque is observed. For this reason, it is essential to use a torque wrench when adjusting the FS 240 (see manual).

This trimmer comes a standard professional cutting head, and can be used with brush knife and saw blade attachments.

Stihl FS 240 C Service Workshop Manual PDF

View page images or download a full PDF that you can print or view on all devices

* Online preview