Stihl 015 Operator Manual
Stihl 015 operator manual for the 015 chainsaw. PDF download operator instructions on how to use and maintain the Stihl 015 (15 series) chainsaw. Clear and concise with easy to understand diagrams detailing the safety, operating, maintaining and storing of the chainsaw.
Stihl 015 Chainsaw Operator Manual Contents
Safety, cutting attachment, bar and chain, fuel, oil, chain brake, stopping/starting engine, adjusting carburetor, air filter, engine management, spark plug, chain sprocket, sharpening the chain, maintenance and care, specifications.
This is The Stihl 015 User Guide, owner manual.
More information for the service and repair of the Stihl 015 chainsaw can be found in the service workshop manual, parts list and any technical notes available for PDF download or online viewing on this website. Also check out any questions and answers, articles or the full specifications pages for the 015 chainsaw.
Adjusting Stihl 015 Carburetor
Stihl 015 chainsaw carburetor guide- The carburetor has been factory adjusted to provide the optimal engine air/fuel flow. Instructions for standard settings to adjust the idling screw, turning either clockwise or counter clockwise. Learn how to set the idling screw correctly if the engine is cutting out or idling incorrectly. Learn how to check the spark plug for a good electrical spark, cleaning or replacing if required. Air filter cleaning and replacement is described in the operator manual. A carburetor PDF manual is available from this website.
Stihl 015 Chainsaw Specifications
ENGINE DISPLACEMENT: 32 cc (2.0 cu. in.)
NUMBER OF CYLINDERS: 1
CYLINDER BORE: 38 mm (1.52 in.)
PISTON STROKE: 28 mm (1.12 in.)
CYLINDER TYPE: Aluminum with a chrome-plated bore
INTAKE METHOD: Piston ported
MANUFACTURER ADVERTISED H.P: 1.8 DIN @ 8,500 rpm
WEIGHT: 4.3 kg (9.6 lbs.) powerhead only
HANDLEBAR SYSTEM: Anti-vibration
CHAIN BRAKE: none
CLUTCH: Centrifugal
DRIVE TYPE: Direct
CONSTRUCTION: Die-cast magnesium
MAGNETO TYPE: Phelon flywheel type
AIR FILTER SYSTEM: Cellulose fiber element (Dacron fiber)
STARTER TYPE: Automatic rewind
OIL PUMP: Automatic, gear driven
MAXIMUM ENGINE RPM:12,500
IDLE RPM: 2,800
IGNITION TIMING: 2.3 mm (0.090 in.) before TDC
BREAKER POINT SETTING: 0.35 to 0.40 mm (0.014 to 0.016 in.)
FLYWHEEL/COIL AIR GAP: Positon is fixed
SPARK PLUG TYPE: Bosch WSR6F, Champion RCJ7Y
SPARK PLUG GAP: 0.51 mm (0.020 in.)
CRANKSHAFT MAIN BEARINGS: Caged needle roller
FUEL TANK CAPACITY: 330 ml (11 fl. oz.)
FUEL OIL RATIO:40: 1 with Stihl oil
RECOMMENDED FUEL OCTANE: Regular grade
MIX OIL SPECIFICATION: Stihl chain saw mix oil
SHORTEST GUIDE BAR SUPPLIED: 30 cm (12 in.)
LONGEST GUIDE BAR SUPPLIED: 40 cm (16 in.
Stihl 015 Operator Manual PDF
* Online preview