Husqvarna 120e Mark II Workshop Manual Repair
Husqvarna 120e Mark II Workshop Manual for the Repair and service of the Husqvarna 120e Mark II chainsaw. The PDF workshop service manual has accurate, easy to understand information and diagrams to help repair and service the chainsaw. Information to help you to troubleshoot, repair and fix the Husqvarna 120e Mark II chainsaw. View pages online or download a complete PDF service manual that you can easily save, print or view on any device.
Husqvarna 120e Mark II Workshop Manual Contents
Contents, Introduction, Safety Regulations, Symbols, Technical data, Service tools, Service data, Safety equipment, Starter, Electrical system, Centrifugal clutch, Lubrication system, Carburetor, Tank unit, Anti-vibration system, Piston and cylinder, Crankcase and crankshaft, Troubleshooting, Repair Instructions.
Carburetor – General Chainsaw Adjustment
Adjusting the carburettor involves adjusting the engine to the local conditions e.g. climate, altitude, fuel and type of two-stroke oil. The carburettor is equipped with three adjustment options.
L = Low speed jet
H = High speed jet
T = Idling adjustment screw
The L and H jets adjust the fuel flow to match the airflow that the throttle valve opening allows. Turning them clockwise makes the fuel/air mixture weaker (less fuel in relation to the amount of air) and turning them anti-clockwise makes the fuel/air mixture richer. A weak mixture increases the engine speed and a rich mixture decreases the engine speed. The T screw controls the throttle position when idling. Turning the T screw clockwise gives faster idling; turning it anti-clockwise lowers idling speed (see manual for complete guide).
See the complete service workshop manual, carburetor manual, parts list, operator manual and technical supplements PDF downloads. Also the repair and service articles available on this website for more information on how to service, repair and find parts for the chainsaw.
Husqvarna 120e Mark II Chainsaw Specifications
1.4kW 405mm (16″) Petrol Chainsaw
Engine
Cylinder displacement: 38.2cm³
Cylinder bore: 40mm
Cylinder stroke: 32mm
Power output: 1.4kW
Maximum power speed: 9000rpm
Maximum recommended engine speed: 13,000rpm
Carburettor: Zama W33
Fuel tank volume: 0.26L
Fuel consumption: 580-640g/kWh
Oil tank volume: 0.15L
Oil pump type: Automatic
Oil pump capacity: 8-8ml/min
Ignition system: IIDA
Ignition module air gap: 0.25mm
Idling speed: 3000rpm
Spark plug: Husqvarna HQT-1
Electrode gap: 0.25mm
Max torque: 1.75Nm/6500rpm
Air filter type: Felt
Lubricants
Engine: Husqvarna 2-stroke oil
Chain/bar: Husqvarna bar & chain oil
Guide bar sprocket: Husqvarna bearing grease
Vibration & noise:
Equivalent vibration level (ahv, eq), front handle: 2.1m/s²
Equivalent vibration level (ahv, eq), rear handle: 2.7m/s²
Sound pressure level: 100.7dB(A)
Sound power level (LWA): 113dB(A)
Cutting equipment
Bar length: 405mm
Chain pitch: 3/8″LP
Chain gauge: .050″
Chain speed at max power: 16.8m/s
Weight: 4.7kg
See manuals for more Husqvarna 120e Mark II chainsaw specs.
The X-Torq engine design reduces harmful exhaust emissions by up to 75% and increases fuel efficiency by up to 20%
SmartStart easy starting – The engine and starter have been designed so the machine starts quickly with minimum effort. Resistance in the starter cord is reduced by up to 40%
LowVib Anti-Vibration – Steel spring anti-vibration dampeners effectively absorb vibrations, sparing the user’s arms and hands
Air Injection – Advanced centrifugal air cleaning system which removes the majority of dust and woodchips before it enters the air filter, resulting in smoother operation, longer intervals between filter cleans and reduced wear on the engine
Combined choke/stop control allow for easier starting and reduce the risk of engine flooding
Air purge designed for easy starting
Double-acting chain brake, throttle lock, right hand guard and chain catcher make the saw safer to use
Quick and easy chain tensioning and assembling of the bar and the chain without using any tools
Husqvarna 120e Mark II Workshop Manual PDF
* Online preview
Reviews
There are no reviews yet.