Husqvarna 135 Mark II Workshop Manual

$0.00

Husqvarna 135 Mark II Workshop Manual for the service and repair of the Husqvarna 135 Mark II chainsaw. View pages online or download a complete PDF manual with clear easy to understand images, diagrams and information. Print or save to any device.

Husqvarna 135 Mark II Workshop Manual Repair

Husqvarna 135 Mark II Workshop Manual for the Repair and service of the Husqvarna 135 Mark II chainsaw. The PDF workshop service manual has accurate, easy to understand information and diagrams to help repair and service the chainsaw. Service Information to help you to troubleshoot, repair and fix the Husqvarna 135 Mark II chainsaw. View pages online or download a complete PDF service manual that you can easily save, print or view on any device.

Husqvarna 135 Mark II Workshop Manual Contents

Contents, Introduction, Safety Regulations, Symbols, Technical data, Service tools, Service data, Safety equipment, Starter, Electrical system, Centrifugal clutch, Lubrication system, Carburetor, Tank unit, Anti-vibration system, Piston and cylinder, Crankcase and crankshaft, Troubleshooting, Repair Instructions.

Carburetor – General Chainsaw Adjustment

Adjusting the carburettor involves adjusting the engine to the local conditions e.g. climate, altitude, fuel and type of two-stroke oil. The carburettor is equipped with three adjustment options.
L = Low speed jet
H = High speed jet
T = Idling adjustment screw

The L and H jets adjust the fuel flow to match the airflow that the throttle valve opening allows. Turning them clockwise makes the fuel/air mixture weaker (less fuel in relation to the amount of air) and turning them anti-clockwise makes the fuel/air mixture richer. A weak mixture increases the engine speed and a rich mixture decreases the engine speed. The T screw controls the throttle position when idling. Turning the T screw clockwise gives faster idling; turning it anti-clockwise lowers idling speed (see manual for complete guide).

See the complete service workshop manual, carburetor manual, parts list, operator manual and technical supplements PDF downloads. Also the repair and service articles available on this website for more information on how to service, repair and find parts for the chainsaw.

Husqvarna 135 Mark II Chainsaw Specifications

Cylinder displacement – 38 см³
Weight (excl. cutting equipment) – 4.7 kg
Power output 1.6 kW
Maximum power speed- 9000 rpm
Idling speed – 3000 rpm
Spark plug – NGK BPMR7A
Electrode gap –0.55 mm
Exhaust emissions (CO2 EU V) – 804 g/kWh
Bar length (inch) – 14″
Chain type – S93G
Recommended bar length, max – 16 in
Recommended bar length, min – 14 in

Read the Husqvarna 135 Mark II Workshop Manual for more chainsaw specs.

Robust, reliable and easy to use saw with ample cutting performance and efficiency for homeowners. The perfect garden chainsaw for occasional cutting tasks such as cutting firewood and felling smaller trees. Starts quickly and handles easily, and thanks to the side-mounted chain tensioner, tensioning the chain is both quick and easy.

Husqvarna 135 Mark II Workshop Manual PDF

* Online preview

Reviews

There are no reviews yet.

Be the first to review “Husqvarna 135 Mark II Workshop Manual”

Your email address will not be published. Required fields are marked *