Husqvarna 261 Workshop Manual

$0.00

Husqvarna 261 Workshop Manual for the service and repair of the Husqvarna 261 chainsaw. View pages online or download a complete PDF manual with clear easy to understand images, diagrams and information. Print or save to any device.

 

 

Husqvarna 261 Workshop Manual Repair

Husqvarna 261 Workshop Manual for the Repair and service of the Husqvarna 261 chainsaw. The PDF workshop service manual has accurate, easy to understand information and diagrams to help repair and service the chainsaw. Service Information to help you to troubleshoot, repair and fix the Husqvarna 261 chainsaw. View pages online or download a complete PDF service manual that you can easily save, print or view on any device.

Husqvarna 261 Workshop Manual Contents

Contents, Introduction, Safety Regulations, Symbols, Technical data, Service tools, Service data, Safety equipment, Starter, Electrical system, Centrifugal clutch, Lubrication system, Carburetor, Tank unit, Anti-vibration system, Piston and cylinder, Crankcase and crankshaft, Troubleshooting, Repair Instructions.

Carburetor – General Chainsaw Adjustment

Adjusting the carburettor involves adjusting the engine to the local conditions e.g. climate, altitude, fuel and type of two-stroke oil. The carburettor is equipped with three adjustment options.
L = Low speed jet
H = High speed jet
T = Idling adjustment screw

The L and H jets adjust the fuel flow to match the airflow that the throttle valve opening allows. Turning them clockwise makes the fuel/air mixture weaker (less fuel in relation to the amount of air) and turning them anti-clockwise makes the fuel/air mixture richer. A weak mixture increases the engine speed and a rich mixture decreases the engine speed. The T screw controls the throttle position when idling. Turning the T screw clockwise gives faster idling; turning it anti-clockwise lowers idling speed (see manual for complete guide).

See the complete service workshop manual, carburetor manual, parts list, operator manual and technical supplements PDF downloads. Also the repair and service articles available on this website for more information on how to service, repair and find parts for the chainsaw.

Husqvarna 261 Chainsaw Specifications

Engine

Cylinder volume, cu.in/cm3: 3,7/61,5

Cylinder bore, inch/mm: 1,89/48

Stroke, inch/mm: 1,34/34

Idle speed, rpm: 2 700

Power, kW/ rpm: 2,9/ 9 600

Ignition system

Manufacture: Electrolux

Type of ignition system: ET

Spark plug: Champion RCJ 7Y
Electrode gap, inch/mm: 0,020/0,5

Fuel and lubrication system

Manufacturer: Walbro

Carburetor type: HDA144
Fuel capacity, US pint/litre: 1,2/0,6

Oil pump capacity at 8 500 rpm, ml/min: 6,5-13,5
Oil capacity, US pint/litre: 0,6/0,3

Type of oil pump: Automatic

Weight

Without bar and chain, Lbs/kg: 12,7/5,8

Chain/bar

Recommended bar lengths, inches/cm: 13-20″/33-51
Usable cutting length inches/cm: 12-19″/30-49

Chain speed at max. power, m/sec: 18,5
Pitch, inches: 0,325″/ 3/8″

Thickness of drive link, inch/mm: 0,058″/1,5 and 0,050″/1,3
Number of teeth on drive sprocket: 7

 

Read the Husqvarna 261 Workshop Manual for more chainsaw specs.

The 62cc engine of this Husqvarna gas chainsaw ensures optimum performance even under the most challenging conditions.

Husqvarna 261 Workshop Manual PDF

* Online preview

Reviews

There are no reviews yet.

Be the first to review “Husqvarna 261 Workshop Manual”

Your email address will not be published. Required fields are marked *