Husqvarna 35 Workshop Manual Repair
Husqvarna 5 Workshop Service Manual for the Repair and service of the Husqvarna 35 chainsaw. The PDF workshop service manual has accurate, easy to understand information and diagrams to help repair and service the chainsaw. Service Information to help you to troubleshoot, repair and fix the Husqvarna 35 chainsaw. View pages online or download a complete PDF service manual that you can easily save, print or view on any device.
Husqvarna 35 Workshop Service Manual Contents
Contents, Introduction, Safety Regulations, Symbols, Technical data, Service tools, Service data, Safety equipment, Starter, Electrical system, Centrifugal clutch, Lubrication system, Carburetor, Tank unit, Anti-vibration system, Piston and cylinder, Crankcase and crankshaft, Troubleshooting, Repair Instructions.
Carburetor – General Chainsaw Adjustment
Adjusting the carburettor involves adjusting the engine to the local conditions e.g. climate, altitude, fuel and type of two-stroke oil. The carburettor is equipped with three adjustment options.
L = Low speed jet
H = High speed jet
T = Idling adjustment screw
The L and H jets adjust the fuel flow to match the airflow that the throttle valve opening allows. Turning them clockwise makes the fuel/air mixture weaker (less fuel in relation to the amount of air) and turning them anti-clockwise makes the fuel/air mixture richer. A weak mixture increases the engine speed and a rich mixture decreases the engine speed. The T screw controls the throttle position when idling. Turning the T screw clockwise gives faster idling; turning it anti-clockwise lowers idling speed (see manual for complete guide).
See the complete service workshop manual, carburetor manual, parts list, operator manual and technical supplements PDF downloads. Also the repair and service articles available on this website for more information on how to service, repair and find parts for the chainsaw.
Husqvarna 35 Chainsaw Specifications
YEAR INTRODUCED: 1986
YEAR DISCONTINUED: 1992
ENGINE DISPLACEMENT: 35ccm (2.1 cu. in.)
CYLINDER BORE: 36.5mm (1.4375 in.)
PISTON STROKE: 32.5mm (1.28 in.)
H.P.: 1.8/1.3 hp/kW
WEIGHT: 4.2 kg with 30 cm bar 7 chain, 9.25 lbs. with 12 in. bar & chain
CARBURETOR: Tillotson HU-4A and HU-18C or Walbro WA-58 type
MAXIMUM ENGINE RPM: 7,800
IDLE RPM: 2,500
IGNITION TIMING: fixed
BREAKER POINT SETTING: 0.30mm (0.015 in.)
FLYWHEEL/COIL AIR GAP: 0.016 in. (0.41 mm)
SPARK PLUG TYPE: Champion CJ6
SPARK PLUG GAP: 0.63mm (0.025 in.)
CRANKSHAFT MAIN BEARINGS: Caged needle roller
FUEL TANK CAPACITY: 350 ml
FUEL OIL RATIO: 25:1
CHAIN PITCH: 3/8 in low profile
SHORTEST GUIDE BAR SUPPLIED: 30cm (12 in.)
LONGEST GUIDE BAR SUPPLIED: 40cm (16 in.)
Read the Husqvarna 35 Workshop Manual for more chainsaw specs.
The Husky 35 is an excellent vintage chainsaw. It was built by EMAB Canada in Huron Park Ontario.
Reviews
There are no reviews yet.