Husqvarna 350 Workshop Manual Repair
Husqvarna 350 Workshop Service Manual for the Repair and service of the Husqvarna 350 chainsaw. The PDF workshop service manual has accurate, easy to understand information and diagrams to help repair and service the chainsaw. Service Information to help you to troubleshoot, repair and fix the Husqvarna 350 chainsaw. View pages online or download a complete PDF service manual that you can easily save, print or view on any device.
Husqvarna 350 Workshop Service Manual Contents
Contents, Introduction, Safety Regulations, Symbols, Technical data, Service tools, Service data, Safety equipment, Starter, Electrical system, Centrifugal clutch, Lubrication system, Carburetor, Tank unit, Anti-vibration system, Piston and cylinder, Crankcase and crankshaft, Troubleshooting, Repair Instructions.
Carburetor – General Chainsaw Adjustment
Adjusting the carburettor involves adjusting the engine to the local conditions e.g. climate, altitude, fuel and type of two-stroke oil. The carburettor is equipped with three adjustment options.
L = Low speed jet
H = High speed jet
T = Idling adjustment screw
The L and H jets adjust the fuel flow to match the airflow that the throttle valve opening allows. Turning them clockwise makes the fuel/air mixture weaker (less fuel in relation to the amount of air) and turning them anti-clockwise makes the fuel/air mixture richer. A weak mixture increases the engine speed and a rich mixture decreases the engine speed. The T screw controls the throttle position when idling. Turning the T screw clockwise gives faster idling; turning it anti-clockwise lowers idling speed (see manual for complete guide).
See the complete service workshop manual, carburetor manual, parts list, operator manual and technical supplements PDF downloads. Also the repair and service articles available on this website for more information on how to service, repair and find parts for the chainsaw.
Husqvarna 350 Chainsaw Specifications
| Model Name | Husqvarna 350 |
| Engine Type | single-cylinder two-stroke |
| Engine Capacity | 45.0cc / 2.75cu.in |
| Cylinder Bore | 42mm / 1.65in |
| Piston Stroke | 32mm / 1.28in |
| Ignition Type | Electronic (Breakerless) magneto |
| Spark Plug Type | NGK BPMR 7A or Champion RCJ 7Y |
| Spark Plug Gap | 0.5mm, 0.02in |
| Carburetor Type | Walbro HDA 195 |
| Fuel Tank Capacity | 0.5 litre |
| Fuel Mixture | 50:1 with Husqvarna two-stroke engine oil |
| Weight | 4.7 kg |
| Catalytic Converter | n/a |
| Chain Lubrication Type | Automatic oil pump |
| Oil Tank Capacity | 0.25 litre |
Read the Husqvarna 350 Workshop Manual for more chainsaw specs.
Complaints of catastrophic engine failure, often in the first few hours of use, brought about by overheating are common. Another very common complaint is that the exhaust muffler simply shakes loose and falls off.
Husqvarna 350 Workshop Manual PDF
* Online preview
Reviews
There are no reviews yet.