Husqvarna 575 XP Workshop Service Manual Repair

Husqvarna 575 XP Workshop Service Manual for the Repair of the Husqvarna 575 XP. The PDF workshop service manual has accurate, easy to understand information and diagrams to help repair and service the chainsaw. Service Information to help you to troubleshoot, repair and fix the Husqvarna 575 XP chainsaw. View pages online or download a complete PDF service manual that you can easily save, print or view on any device.

Husqvarna 575 XP Workshop Service Manual Contents

Contents, Introduction, Safety Regulations, Symbols, Technical data, Service tools, Service data, Safety equipment, Starter, Electrical system, Centrifugal clutch, Lubrication system, Carburetor, Tank unit, Anti-vibration system, Piston and cylinder, Crankcase and crankshaft, Troubleshooting, Repair Instructions.

Husqvarna 575 XP Chainsaw Specifications

Weight: 6.80 kg.
Chain tension; side access
Oil tank volume: 0.37 l.

Cylinder displacement: 4.48 cu.inch / 73.5 cmł
Power: 5.4 hp / 4.0 kW
Maximum recommended engine speed: 13 600 mm
Fuel tank volume: 1.48 US pint / 0.7l
Oil tank volume: 0.78 US pint / 0.37l
Oil pump type adjustable flow

Idle speed: rpm 2700

Power: kW/hp @ rpm 4,0/5,5 @ 9600

Ignition system: SEM

Type of ignition system: CD

Spark plug: NGK BPMR 7A or Champion RCJ 7Y

Electrode gap, inch/mm: 0,02/0,5

Manufacturer of carburetor: Zama

Carburetor type: C1M-EL40

Weight Chain saw without bar or chain, empty tanks: lb/kg 15,4/7,0

Chain/bar Recommended bar lengths, inch/cm: 16-32”/40-80

Chain Pitch, inch/mm: 3/8″ /9,52

Chain Thickness of drive links, inch/mm: 0,050/1,30,058/1,5

Chain Usable cutting length, inches/cm: 15-31”/38-78

Drive sprocket type/teeth Rim: 7

Chain speed at max. power, m/sec: 21,4

Read the Husqvarna 5575 XP Workshop Manual for more chainsaw specs.

The Husky 575 XP chainsaw, XP = Xtra Power. The 575 XP was not the most popular chainsaw with Husky owners and was eventually discontinued due to various issues.

Husqvarna 575 XP Auto Tune Reset (for 575 XP with Autotune)

Start the chainsaw and run it in the Cold start position for at least 90 seconds.
• Do not touch the throttle or accelerate the saw during this time.
• After 90 seconds, the machine should be switched off
• Your saw is now re-calibrated and ready to use.

Husqvarna 575 XP Workshop Manual PDF

* Online preview

Reviews

There are no reviews yet.

Be the first to review “Husqvarna 575 XP Workshop Service Manual”