Echo CS-360T Service Manual

$0.00

Echo CS-360T Service Workshop Manual for the Echo CS-360T chainsaws. View free page images online or download PDF with images, diagrams and information. Print or save to any device.
Download PDF Manual

Echo CS-360T Service Manual Repair

Echo CS-360T Service Workshop Manual for the Repair and service of 360T chainsaws. The PDF manual has diagrams and acurate information to help to troubleshoot, repair and fix the Echo chainsaw. View free page images online or download a PDF manual that you can easily save, print or view on most devices.

Echo CS-360T Service Manual-Service Data

SERVICE INFORMATION

Specification, Technical data, Torque limits, Special repairing materials, Service limits., Special tools.

CARBURETOR ADJUSTMENT PROCEDURE

General adjusting rules, Presetting idle adjust screw, L mixture needle and H mixture needle, Adjusting carburetor.

See the additional carburetor manual, parts list, operator manual and technical supplements PDF download available on this website for more information on how to service and repair the chainsaw.

Echo CS-360T Chainsaw Specifications

Echo CS-360T chainsaw model carbureter type: Walbro WT-728 OEM Part Number A021001120.

Model: CS-360T

Dimensions

Length: mm(in) 277 (10.9)

Width: mm(in) 247 (9.7)

Height: mm(in) 214 (8.4)

Dry weight: kg(lb) 3.6 (7.9)

Engine

Type: KIORITZ, air-cooled, two-stroke, single cylinder

Rotation: Clockwise as viewed from the output end

Displacement: cm3(in3) 36.3(2.215)

Bore: mm(in) 38.0 (1.496)

Stroke: mm(in) 32.0 (1.260)

Compression: ratio 7.5

Carburetor

Type: Diaphragm horizontal-draft with auto-return choke

Model: Walbro WT-728

Venturi size-Throttle bore: mm(in) 11.11 – 15.85 (0.437 – 0.624)

Ignition

Type: CDI (Capacitor discharge ignition) system with electronic timing advancer and speed governor

Spark plug: BPM8Y

Starter

Type: Automatic rewind

Rope diameter x length: mm(in) 3.0 x 920 (0.12 x 36.2)

Fuel

Type: Premixed two-stroke fuel

Mixture ratio: 50 : 1 (2 %)

Gasoline: Minimum 89 octane gasoline

Two-stroke air cooled engine oil: ISO-L-EGD (ISO/CD13738), JASO FC

Tank capacity: L (U.S.fl.oz.) 0.31 (10.5)

Clutch Type: Centrifugal, 3-shoe slide with 3-tension spring

Guide bar / Saw chain lubrication type: Automatic with volume adjuster

Oil Tank capacity: L (U.S.fl.oz.) 0.29 (9.8)

Sprocket

Type: Spur

Number of teeth: 6

Pitch: in 3/8

Cutting devices

Saw chain Type: OREGON 91VG

Pitch: (in) Low profile 3/8

Gauge: (in) 0.050

carburetor adjustment

1. Start engine and run for several minutes to reach operating temperature.
2. Stop engine.
3. Start engine and turn the high-speed needle (A) rich (CCW) until the engine runs between 13,500 and 14,500 RPM. Then turn the low-speed needle (B) rich (CCW) until the engine does not hesitate when accelerated.
DO NOT REMOVE LIMITER CAPS!
4. Idle Speed Adjustment. • Turn “idle” speed adjustment screw (C) CW until the saw chain begins to move, then turn the screw CCW until saw chain stops moving. Turn screw CCW an additional 1/4 turn.
5. Accelerate to full throttle for 2-3 seconds to clear excess fuel from engine then return to idle. Accelerate to full throttle to check for smooth transition from idle to full throttle.

Part NUMBER: A021001120 CARBURETOR – Walbro WT-728

See manuals for more chainsaw specs..

Echo CS-360T Service Workshop Manual PDF

* Online preview