Husqvarna 140 E Workshop Manual Repair
Husqvarna 140 E Workshop Manual for the Repair and service of the Husqvarna 140 E chainsaw. The PDF workshop service manual has accurate, easy to understand information and diagrams to help repair and service the chainsaw. Service Information to help you to troubleshoot, repair and fix the Husqvarna 140 E chainsaw. View pages online or download a complete PDF service manual that you can easily save, print or view on any device.
Husqvarna 140 E Workshop Manual Contents
Contents, Introduction, Safety Regulations, Symbols, Technical data, Service tools, Service data, Safety equipment, Starter, Electrical system, Centrifugal clutch, Lubrication system, Carburetor, Tank unit, Anti-vibration system, Piston and cylinder, Crankcase and crankshaft, Troubleshooting, Repair Instructions.
Carburetor – General Chainsaw Adjustment
Adjusting the carburettor involves adjusting the engine to the local conditions e.g. climate, altitude, fuel and type of two-stroke oil. The carburettor is equipped with three adjustment options.
L = Low speed jet
H = High speed jet
T = Idling adjustment screw
The L and H jets adjust the fuel flow to match the airflow that the throttle valve opening allows. Turning them clockwise makes the fuel/air mixture weaker (less fuel in relation to the amount of air) and turning them anti-clockwise makes the fuel/air mixture richer. A weak mixture increases the engine speed and a rich mixture decreases the engine speed. The T screw controls the throttle position when idling. Turning the T screw clockwise gives faster idling; turning it anti-clockwise lowers idling speed (see manual for complete guide).
See the complete service workshop manual, carburetor manual, parts list, operator manual and technical supplements PDF downloads. Also the repair and service articles available on this website for more information on how to service, repair and find parts for the chainsaw.
Husqvarna 140 E Chainsaw Specifications
| Cylinder Displacement | 40.9 cc |
| Power Output | 2 hp |
| Maximum Power Speed | 9000 rpm |
| Maximum Recommended Engine Speed | 12000 rpm |
| Idling Speed | 2900 rpm |
| Spark Plug | Champion RCJ7Y, NGK BPMR7A |
| Electrode Gap | 0.02″ |
| Torque, Max. | 2 Nm/6300rpm |
| Oil Tank Volume | 0.25 Liters |
| Oil Pump Type | Fixed Flow |
| Oil Pump Capacity | 13 ml/min |
| Equivalent Vibration Level (ahv, eq) | Front: 3.4 m/s² Rear Handle: 3.5 m/s² |
| Sound Pressure Level at Operators Ear | 102 dB(A) |
| Sound Power Level, Guaranteed (LWA) | 114 dB(A) |
| Chain Pitch | 3/8″ LP |
| Bar Length | 16″ (400mm) |
| Chain Speed at Maximum Power | 17.1m/s OR 56.1 fts |
| Weight (Excluded cutting equipment) | 4.4 kg |
Read the Husqvarna 140 E Workshop Manual for more chainsaw specs.
Lightweight and efficient homeowner saw ideal for those looking for a chainsaw that is exceptionally easy to start and manoeuvre. Featuring X-Torq engine for lower fuel consumption and reduced emission levels. Equipped with fuel pump and Auto return stop switch for easier starting.
Husqvarna 140 E Workshop Manual PDF
* Online preview
Reviews
There are no reviews yet.