Husqvarna 236 E Workshop Manual

Husqvarna 236 E Workshop Manual Repair

Husqvarna 236 E Workshop Manual for the Repair and service of the Husqvarna 236 E chainsaw. The PDF workshop service manual has accurate, easy to understand information and diagrams to help repair and service the chainsaw. Service Information to help you to troubleshoot, repair and fix the Husqvarna 236 E chainsaw. View pages online or download a complete PDF service manual that you can easily save, print or view on any device.

Husqvarna 236 E Workshop Manual Contents

Contents, Introduction, Safety Regulations, Symbols, Technical data, Service tools, Service data, Safety equipment, Starter, Electrical system, Centrifugal clutch, Lubrication system, Carburetor, Tank unit, Anti-vibration system, Piston and cylinder, Crankcase and crankshaft, Troubleshooting, Repair Instructions.

Carburetor – General Chainsaw Adjustment

Adjusting the carburettor involves adjusting the engine to the local conditions e.g. climate, altitude, fuel and type of two-stroke oil. The carburettor is equipped with three adjustment options.
L = Low speed jet
H = High speed jet
T = Idling adjustment screw

The L and H jets adjust the fuel flow to match the airflow that the throttle valve opening allows. Turning them clockwise makes the fuel/air mixture weaker (less fuel in relation to the amount of air) and turning them anti-clockwise makes the fuel/air mixture richer. A weak mixture increases the engine speed and a rich mixture decreases the engine speed. The T screw controls the throttle position when idling. Turning the T screw clockwise gives faster idling; turning it anti-clockwise lowers idling speed (see manual for complete guide).

See the complete service workshop manual, carburetor manual, parts list, operator manual and technical supplements PDF downloads. Also the repair and service articles available on this website for more information on how to service, repair and find parts for the chainsaw.

Husqvarna 236 E Chainsaw Specifications

Engine

Cylinder displacement 2.3 cu.inch / 38 cm³
Power output 1.9 hp / 1.4 kW
Horsepower 1.9 hp(M)
Idling speed 3000 rpm
Maximum power speed 9000 rpm
Cylinder bore 1.6 inch / 40 mm
Cylinder stroke 1.3 inch / 32 mm
Ignition system IIDA
Ignition module air gap 0 ” / 0.3 mm
Spark plug NGK BPMR7A
Electrode gap 0 ” / 0.5 mm
Carburettor model name ZAMA W29
Fuel tank volume 0.6 US pint / 0.3 litre
Oil tank volume 0.4 US pint / 0.2 litre
Oil pump type Fixed flow
Oil pump capacity 8-8 ml/min

Cutting equipment

Chain pitch 3/8″
Recommended bar length, min-max 14″-16″ / 35-40 cm
Chain speed at max power 53.5 fts / 16.3 m/s

Emission, vibration & noise data

Equivalent vibration level (ahv , eq) front / rear handle 3.4/4.5 m/s²
Sound pressure level at operators ear 98.6 dB(A)
Guaranteed sound power level, LWA 113 dB(A)

Overall dimensions

Weight (excl. cutting equipment) 10.1 lbs / 4.6 kg

Read the Husqvarna 236 E Workshop Manual for more chainsaw specs.

The Husqvarna 236 e-series chainsaw is ideal for jobs like pruning, lighter cutting tasks and hobby work. Easy to start and operate with built-in Husqvarna features like ergonomic design, facilitating technology and powerful X-Torq engine with low emissions. Equipped with Smart Start and tool-less chain tensioning.

Husqvarna 236 E Workshop Manual PDF

* Online preview