Husqvarna 262 XP Workshop Service Manual

Husqvarna 262 XP Workshop Manual Repair

Husqvarna 262 XP Workshop Manual for the Repair and service of the Husqvarna 262 XP chainsaw. The PDF workshop service manual has accurate, easy to understand information and diagrams to help repair and service the chainsaw. Service Information to help you to troubleshoot, repair and fix the Husqvarna 262 XP chainsaw. View pages online or download a complete PDF service manual that you can easily save, print or view on any device.

Husqvarna 262 XP Workshop Manual Contents

Contents, Introduction, Safety Regulations, Symbols, Technical data, Service tools, Service data, Safety equipment, Starter, Electrical system, Centrifugal clutch, Lubrication system, Carburetor, Tank unit, Anti-vibration system, Piston and cylinder, Crankcase and crankshaft, Troubleshooting, Repair Instructions.

Carburetor – General Chainsaw Adjustment

Adjusting the carburettor involves adjusting the engine to the local conditions e.g. climate, altitude, fuel and type of two-stroke oil. The carburettor is equipped with three adjustment options.
L = Low speed jet
H = High speed jet
T = Idling adjustment screw

The L and H jets adjust the fuel flow to match the airflow that the throttle valve opening allows. Turning them clockwise makes the fuel/air mixture weaker (less fuel in relation to the amount of air) and turning them anti-clockwise makes the fuel/air mixture richer. A weak mixture increases the engine speed and a rich mixture decreases the engine speed. The T screw controls the throttle position when idling. Turning the T screw clockwise gives faster idling; turning it anti-clockwise lowers idling speed (see manual for complete guide).

See the complete service workshop manual, carburetor manual, parts list, operator manual and technical supplements PDF downloads. Also the repair and service articles available on this website for more information on how to service, repair and find parts for the chainsaw.

Husqvarna 262 XP Chainsaw Specifications

62 cc (3.8 cu in)
4.8 hp (3.5 kW)
12.8 lbs (5.8 kgs)
48mm bore, 34mm stroke
13,500 RPM max (without load)
Auto and adjustable oil pump
Nylon mesh air filter
Walbro carb

Read the Husqvarna 262 XP Workshop Manual for more chainsaw specs.

The 262XP is a 62cc 4.8 hp chainsaw that was made between 1990 and 1996. It also has a very good power-to-weight ratio. The powerhead only weighs 12.8 lbs or 5.8 kgs. It has all the other features you’d expect on a 90s-era Husky – chain brake, operator presence lever, automatic oiler, magnesium construction, etc.

Husqvarna 262 XP Workshop Manual PDF

* Online preview