Husqvarna 272 XP Workshop Service Manual

Husqvarna 272 XP Workshop Manual Repair

Husqvarna 272 XP Workshop Manual for the Repair and service of the Husqvarna 272 XP chainsaw. The PDF workshop service manual has accurate, easy to understand information and diagrams to help repair and service the chainsaw. Service Information to help you to troubleshoot, repair and fix the Husqvarna 272 XP chainsaw. View pages online or download a complete PDF service manual that you can easily save, print or view on any device.

Husqvarna 272 XP Workshop Manual Contents

Contents, Introduction, Safety Regulations, Symbols, Technical data, Service tools, Service data, Safety equipment, Starter, Electrical system, Centrifugal clutch, Lubrication system, Carburetor, Tank unit, Anti-vibration system, Piston and cylinder, Crankcase and crankshaft, Troubleshooting, Repair Instructions.

Carburetor – General Chainsaw Adjustment

Adjusting the carburettor involves adjusting the engine to the local conditions e.g. climate, altitude, fuel and type of two-stroke oil. The carburettor is equipped with three adjustment options.
L = Low speed jet
H = High speed jet
T = Idling adjustment screw

The L and H jets adjust the fuel flow to match the airflow that the throttle valve opening allows. Turning them clockwise makes the fuel/air mixture weaker (less fuel in relation to the amount of air) and turning them anti-clockwise makes the fuel/air mixture richer. A weak mixture increases the engine speed and a rich mixture decreases the engine speed. The T screw controls the throttle position when idling. Turning the T screw clockwise gives faster idling; turning it anti-clockwise lowers idling speed (see manual for complete guide).

See the complete service workshop manual, carburetor manual, parts list, operator manual and technical supplements PDF downloads. Also the repair and service articles available on this website for more information on how to service, repair and find parts for the chainsaw.

Husqvarna 272 XP Chainsaw Specifications

Power Output : 3.6 kW
Cylinder Displacement : 72.2 cc
Maximum Power Speed : 9300 RPM
Max engine/motor RPM : 13500 RPM
Idling Speed : 2600 RPM
Torque (max.) : 4 Nm
Torque (max.) at rpm : 6000 rpm
Clutch Engagement Speed (±120) : 3500 RPM
Fuel Consumption : 506 g/kWh
Fuel Consumption : 1.6 kg/h
Spark Plug : Champion RCJ7Y, NGK BPMR7A
Electrode Gap : 0.5 mm
Ignition Module Air Gap : 0.3 mm
Oil Pump Type : Automatic
Oil Pump Capacity (Max) : 18.4 ml/min
Oil Pump Capacity (Min) : 5.9 ml/min

Equipment :
Bar Length (inch) : 24″
Chain Type : H42
Sprocket Type : Rim 7
Bar Mount Type : Large
Recommended Bar Length, min-max : 15-24 in

Lubricant :
Lubricant Type : Husqvarna or equivalent at 50:1
Oil Tank Volume : 0.4 L

Sound and Noise :
Sound Power Level. Guranteed (LWA) : 117 db(A)
Sound Power Level. Measured : 116 db(A)
Sound Pressure Level at Operator’s ear : 103 db(A)

Vibration :
Equivalent Vibration Level (ahv. eq) front handle : 6.6 m/s2
Equivalent Vibration Level (ahv. eq) rear handle : 7.7 m/s2

Dimensions :
Weight : 6.3 kg

Read the Husqvarna 272 XP Workshop Manual for more chainsaw specs.

Features :
Adjustable Oil Pump : Adjustable Oil Pump makes it easy to set the chain lubrication according to your needs.
Magnesium Crankcase : Sturdily built crankcase withstands high rpms and tough professional use, ensuring a long service life.
Three-piece crankshaft : Forged three-piece crankshaft for maximum durability for the toughest applications.
Low Vib : Effective anti-vibration dampeners absorb vibration, sparing the user’s arms and hands.

A professional saw is designed for highly demanding conditions where efficiency is of prime importance. it combines high power, low weight and rapid acceleration. Equipped with a three-piece crankshaft and magnesium crankcase.

Cylinder displacement 72,2 cm³, Power output 3,6 kW. The 272 XP chainsaw shares some parts with the 61, 266,and 268 husky’s as well as the 625,630, and 670 Jonsered saws.

Husqvarna 272 XP Workshop Manual PDF

* Online preview