Husqvarna 345 E Workshop Service Manual

Husqvarna 345 E Workshop Manual Repair

Husqvarna 345 E Workshop Service Manual for the Repair and service of the Husqvarna 345 E chainsaw. The PDF workshop service manual has accurate, easy to understand information and diagrams to help repair and service the chainsaw. Service Information to help you to troubleshoot, repair and fix the Husqvarna 345 E chainsaw. View pages online or download a complete PDF service manual that you can easily save, print or view on any device.

Husqvarna 345 E Workshop Service Manual Contents

Contents, Introduction, Safety Regulations, Symbols, Technical data, Service tools, Service data, Safety equipment, Starter, Electrical system, Centrifugal clutch, Lubrication system, Carburetor, Tank unit, Anti-vibration system, Piston and cylinder, Crankcase and crankshaft, Troubleshooting, Repair Instructions.

Carburetor – General Chainsaw Adjustment

Adjusting the carburettor involves adjusting the engine to the local conditions e.g. climate, altitude, fuel and type of two-stroke oil. The carburettor is equipped with three adjustment options.
L = Low speed jet
H = High speed jet
T = Idling adjustment screw

The L and H jets adjust the fuel flow to match the airflow that the throttle valve opening allows. Turning them clockwise makes the fuel/air mixture weaker (less fuel in relation to the amount of air) and turning them anti-clockwise makes the fuel/air mixture richer. A weak mixture increases the engine speed and a rich mixture decreases the engine speed. The T screw controls the throttle position when idling. Turning the T screw clockwise gives faster idling; turning it anti-clockwise lowers idling speed (see manual for complete guide).

See the complete service workshop manual, carburetor manual, parts list, operator manual and technical supplements PDF downloads. Also the repair and service articles available on this website for more information on how to service, repair and find parts for the chainsaw.

Husqvarna 345 E Chainsaw Specifications

Engine Type	single-cylinder two-stroke
Engine Capacity	45cc
Cylinder Bore	42mm
Piston Stroke	32.5mm
Ignition Type	CD
Spark Plug Type	NGK BPMR 7A or Champion RCJ 7Y
Spark Plug Gap	0.5mm
Carburetor Type	Zama C3-EL 18
Fuel Tank Capacity	0.5 litre
Fuel Mixture	50:1 with Husqvarna two-stroke engine oil
Weight	4.7 kg
Catalytic Converter	No
Chain Lubrication Type	Automatic oil pump
Oil Tank Capacity	0.25 litre

Read the Husqvarna 345 E Workshop Manual for more chainsaw specs.

Engine power 3.00 HP
Engine power 2.20 kW

Very powerful chainsaw for it’s weight

Featuring a power output of only 2.2kW / 3hp engine, the Husqvarna 345 chain saw is a useful all-round saw. The only consistent owner complaint is that it’s rather loud when running. Ideal for performing simple chores around the home: trimming shrubs, pruning, cutting small trees, cutting firewood

Husqvarna 345 E Workshop Manual PDF

* Online preview