Husqvarna 357 XP Workshop Manual

Husqvarna 357 XP Workshop Manual Repair

Husqvarna 357 XP Workshop Manual for the Repair and service of the Husqvarna 357XP chainsaw. The PDF workshop service manual has diagrams and acurate repair and servicing information to help you to troubleshoot, repair and fix the Husqvarna 357 XP chainsaw (357XP). View pages online or download a complete PDF manual that you can easily save, print or view on any device.

Husqvarna 357 XP Workshop Manual Contents

Contents, Introduction, Safety Regulations, Special Tools, Technical Data, Construction and Function, Troubleshooting, Repair Instructions.

Carburettor – Adjustment

Adjusting the carburettor involves adjusting the engine to the local conditions e.g. climate, altitude, fuel and type of two-stroke oil. The carburettor is equipped with three adjustment options.
L = Low speed jet
H = High speed jet
T = Idling adjustment screw

The L and H jets adjust the fuel flow to match the airflow that the throttle valve opening allows. Turning them clockwise makes the fuel/air mixture weaker (less fuel in relation to the amount of air) and turning them anti-clockwise makes the fuel/air mixture richer. A weak mixture increases the engine speed and a rich mixture decreases the engine speed. The T screw controls the throttle position when idling. Turning the T screw clockwise gives faster idling; turning it anti-clockwise lowers idling speed (see manual for complete guide).

See the service workshop manual, carburetor manual, parts list, operator manual and technical supplements PDF downloads, also the repair and service articles available on this website for more information on how to service, repair and find parts for the chainsaw.

Husqvarna 357 XP Chainsaw Specifications

Displacement (cm3/cubic inches): 57 / 3,5

Cylinder bore (Ø mm/Ø inches): 46,0 / 1,81

Stroke (mm/inches): 34,0 / 1,34

Max power/speed (kW/hp/rpm): 3,2 / 9 600

Spark plug gap (mm/inches): 0,5 / 0,02

Ignition system: FHP ET

Air gap (mm/inches): 0,3 / 0,012

Carburetor type: Walbro HDA 174, (EPA) Walbro HDA 175

Effective cutting length (cm/inches): 33-61 / 13-24

Chain speed at max power – revs (m/s – rpm): 21,4 / 9 600

Chain pitch (mm/inches): 8,25 / 0,325/ 9,52/3/8

Drive link (mm/inches): 1,5 / 0,058

Idling speed (rpm): 2 700

Engagement speed (rpm): 3 800

Max. speed (rpm): 14 000

Spark plug: Bosch RCJ 7Y, NGK BPMR 7A

Fuel tank capacity (Litres/US pints): 0,68 / 1,44

Oil tank capacity (Litres/US pints): 0,38 / 0,80

Automatic oil pump: Yes

Weight with bar and chain (kg / lbs): 6,3 / 13,9

See manuals for more chainsaw specs..

Husqvarna 357 XP Workshop Service Manual PDF

* Online preview