Husqvarna Husqvarna 372 XP X-Torq Workshop Manual Repair
Husqvarna Husqvarna 372 XP X-Torq Workshop Service Manual for the Repair of the Husqvarna Husqvarna 372 XP X-Torq chainsaw. The PDF workshop service manual has accurate, easy to understand information and diagrams to help repair and service the chainsaw. Service Information to help you to troubleshoot, repair and fix the Husqvarna Husqvarna 372 XP X-Torq chainsaw. View pages online or download a complete PDF service manual that you can easily save, print or view on any device.
Husqvarna 372 XP X-Torq Workshop Service Manual Contents
Contents, Introduction, Safety Regulations, Symbols, Technical data, Service tools, Service data, Safety equipment, Starter, Electrical system, Centrifugal clutch, Lubrication system, Carburetor, Tank unit, Anti-vibration system, Piston and cylinder, Crankcase and crankshaft, Troubleshooting, Repair Instructions.
Carburetor – General Chainsaw Adjustment
Adjusting the carburettor involves adjusting the engine to the local conditions e.g. climate, altitude, fuel and type of two-stroke oil. The carburettor is equipped with three adjustment options.
L = Low speed jet
H = High speed jet
T = Idling adjustment screw
The L and H jets adjust the fuel flow to match the airflow that the throttle valve opening allows. Turning them clockwise makes the fuel/air mixture weaker (less fuel in relation to the amount of air) and turning them anti-clockwise makes the fuel/air mixture richer. A weak mixture increases the engine speed and a rich mixture decreases the engine speed. The T screw controls the throttle position when idling. Turning the T screw clockwise gives faster idling; turning it anti-clockwise lowers idling speed (see manual for complete guide).
See the complete service workshop manual, carburetor manual, parts list, operator manual and technical supplements PDF downloads. Also the repair and service articles available on this website for more information on how to service, repair and find parts for the chainsaw.
Husqvarna 372 XP X-Torq Chainsaw Specifications
Husqvarna 372 XP Specs
| 372 XP X-Torq | 372 XP G (heated) | |
|---|---|---|
| Engine | ||
| Cylinder displacement | 70.7 cm³ | 70.7 cm³ |
| Cylinder displacement | 4.31 in³ | 4.3 in³ |
| Power output | 5.5 hp 4.1 kW |
5.5 hp 4.1 kW |
| Maximum power speed | 10 200 RPM | 10 200 RPM |
| Fuel tank volume | 1.62 US pint 0.76 liters |
1.62 US pint 0.76 liters |
| Fuel consumption | 426 g/kWh | 426 g/kWh |
| Idling speed | 2 700 RPM | 2 700 RPM |
| Spark plug | Champion RCJ7Y, NGK BPMR7A | NGK BPMR7A |
| Electrode gap | 0” | 0” |
| Torque (max) | 3.8 Nm | 3.8 Nm |
| Dimensions | ||
| Weight (without cutting equipment) | 14.6 lbs 6.62 kg |
15 lbs 6.8 kg |
| Size (Length x Width x Height) | 17.1 x 9.7 x 12.6” 43.4 x 24.6 x 32 cm |
17.1 x 9.7 x 12.6” 43.4 x 24.6 x 32 cm |
| Equipment | ||
| Recommended bar length (min) | 16” (40 cm) | 16” (40 cm) |
| Recommended bar length (max) | 28” (71 cm) | 28” (71 cm) |
| Lubrincant | ||
| Oil tank volume | 0.89 US pint 0.42 liters |
0.89 US pint 0.42 liters |
| Oil pump type | Automatic | Automatic |
| Oil pump capacity (min) | 4 ml/min | 4 ml/min |
| Oil pump capacity (max) | 20 ml/min | 20 ml/min |
| Sound and noise | ||
| Sound power level, guaranteed (LWA) | 119 dB(A) | 119 dB(A) |
| Sound power level, measured | 118 dB(A) | 118 dB(A) |
| Sound pressure level at operators ear | 110 dB(A) | 110 dB(A) |
| Vibrations | ||
| Equivalent vibration level (ahv, eq) front handle | 5.7 m/s² | 5.7 m/s² |
| Equivalent vibration level (ahv, eq) rear handle | 8.0 m/s² | 8.0 m/s² |
Husqvarna 372 XP X-Torq variants
| 372 XP X-Torq | 372 XP G (heated) | |
|---|---|---|
| 28” Bar ⅜” Pitch .063” Gauge |
965 96 83-42 | |
| 20” Bar ⅜” Pitch .050” Gauge |
965 96 83-08 | |
| 20” Bar ⅜” Pitch .058” Gauge |
965 96 83-09 | 965 96 86-09 |
| 24” Bar ⅜” Pitch .050” Gauge |
965 96 83-11 | 965 96 86-10 |
| 24” Bar ⅜” Pitch .058” Gauge |
965 96 83-12 | 965 96 86-11 |
| 28” Ba r⅜” Pitch .050” Gauge |
965 96 83-15 | |
| 28” Bar ⅜” Pitch .058” Gauge |
965 96 83-21 | |
| 32” RSN ⅜” Pitch 1.6 mm H83 |
965 96 83-43 |
Read the Husqvarna 372 XP X-Torq Workshop Manual for more chainsaw specs.
There are two versions of this saw. The regular 372 XP and a version with heated handles – 372 XP G.
As a true professional chainsaw with enough power for longer bar options.
X-Torq: Delivers lower fuel consumption and reduced exhaust emission levels in accordance with the world´s most stringent environmental regulations.
Adjustable oil pump: Allows you to control oil flow depending on application and weather conditions.
Three-piece crankshaft: Forged three-piece crankshaft for maximum durability for the toughest applications.
Front handle ergonomics: Better grip and a 7° offset handle reduces fatigue.
Husqvarna 372 XP X-Torq Workshop Manual PDF
* Online preview
Reviews
There are no reviews yet.