Husqvarna 440 II Workshop Manual Repair
Husqvarna 440 II Workshop Manual for the Repair and service of the Husqvarna 440 II chainsaw. The PDF workshop service manual has accurate, easy to understand information and diagrams to help repair and service the chainsaw. Service Information to help you to troubleshoot, repair and fix the Husqvarna 440 II chainsaw. View pages online or download a complete PDF service manual that you can easily save, print or view on any device.
Husqvarna 440 II Workshop Manual Contents
Contents, Introduction, Safety Regulations, Symbols, Technical data, Service tools, Service data, Safety equipment, Starter, Electrical system, Centrifugal clutch, Lubrication system, Carburetor, Tank unit, Anti-vibration system, Piston and cylinder, Crankcase and crankshaft, Troubleshooting, Repair Instructions.
Carburetor – General Chainsaw Adjustment
Adjusting the carburettor involves adjusting the engine to the local conditions e.g. climate, altitude, fuel and type of two-stroke oil. The carburettor is equipped with three adjustment options.
L = Low speed jet
H = High speed jet
T = Idling adjustment screw
The L and H jets adjust the fuel flow to match the airflow that the throttle valve opening allows. Turning them clockwise makes the fuel/air mixture weaker (less fuel in relation to the amount of air) and turning them anti-clockwise makes the fuel/air mixture richer. A weak mixture increases the engine speed and a rich mixture decreases the engine speed. The T screw controls the throttle position when idling. Turning the T screw clockwise gives faster idling; turning it anti-clockwise lowers idling speed (see manual for complete guide).
See the complete service workshop manual, carburetor manual, parts list, operator manual and technical supplements PDF downloads. Also the repair and service articles available on this website for more information on how to service, repair and find parts for the chainsaw.
Husqvarna 440 II Chainsaw Specifications
Engine | |
Power output | 2.4 hp |
Cylinder displacement | 40.9 cm³ |
Maximum power output | 9,000 rpm |
Idling speed | 2,900 rpm |
Torque, max. | 2.16 Nm |
Torque, max. At rpm | 6,300 rpm |
Clutch engagement speed (±120) | 4,300 rpm |
Fuel consumption | 513 g/kWh |
Electrode gap | 0.02 in |
Ignition module air gap | 0.01 in |
Oil pump type | Fixed flow |
Exhaust emissions (CO2 EU V) | 813 g/kWh |
Equipment | |
Bar length | 18 in |
Recommended bar length, min-max | 13-18 in |
Chain type | SP33G |
Gauge | .050” |
Pitch | .325” |
Sprocket type | Spur 7 |
Dimensions | |
Weight (excl. cutting equipment) | 9.7 lbs |
Lubricant | |
Lubricant type | Husqvarna 2 stroke or equiv. at 50:1 |
Oil tank volume | 0.53 US pint |
Sound and noise | |
Sound power level, guaranteed (LWA) | 114 dB(A) |
Sound power level, measured | 112 dB(A) |
Sound pressure level at operators ear | 102 dB(A) |
Read the Husqvarna 440 II Workshop Manual for more chainsaw specs.
The Husky 440 II is a second generation lightweight and efficient all-round saw, ideal for those looking for a chainsaw that is exceptionally easy to start and manoeuvre.
Featuring X-Torq engine for lower fuel consumption and reduced emission levels. Equipped with Smart Start®, fuel pump and Auto return stop switch for easier starting. Easier handling with tool-less chain tensioner.
Features
- Smart Start: The engine and starter have been designed so the machine starts quickly with minimum effort. Resistance in the starter cord is reduced by up to 40%.
- Air Injection: Unique intake air cleaning for longer operating time.
- Flip-up tank cap: The flip-up tank cap is easy to open and close when refueling.
- Quick-release air filter: Facilitates cleaning and replacement of the air filter.
- Combined choke/stop control
- X-Torq
- Ergonomic rear handle
- Felling marks
- Three-piece crankshaft
- Snap-lock cylinder cover
- Visible fuel level
- LowVib
- Fuel pump
- Tool less chain tensioning
- Inertia chain brake
- Easy to start
Husqvarna 440 II Workshop Manual PDF
* Online preview
Reviews
There are no reviews yet.