Stihl 011 AVEQ Service Workshop Manual

Stihl 011 AVEQ Workshop Service Manual Repair

Stihl 011 AVEQ Workshop Manual for the Repair and service of the Stihl 011 AVEQ chainsaw (011AVEQ). The PDF workshop service manual has accurate, easy to understand information and diagrams to help repair and service, information to help you to troubleshoot, repair and fix the Stihl 011 AVEQ chainsaw (011AVEQ). View pages online or download a complete PDF service manual that you can easily save, print or view on any device. This complete PDF manual is an Instant download.

Stihl 011 AVEQ Workshop Service Manual Contents

Contents, Introduction, Safety Regulations, Symbols, Technical data, Service tools, Service data, Safety equipment, Starter, Electrical system, Centrifugal clutch, Lubrication system, Carburetor, Tank unit, Anti-vibration system, Piston and cylinder, Crankcase and crankshaft, Troubleshooting, Repair Instructions.

Carburetor – General Chainsaw Adjustment

Adjusting the carburettor involves adjusting the engine to the local conditions e.g. climate, altitude, fuel and type of two-stroke oil. The carburettor is equipped with three adjustment options.
L = Low speed jet
H = High speed jet
T = Idling adjustment screw

The L and H jets adjust the fuel flow to match the airflow that the throttle valve opening allows. Turning them clockwise makes the fuel/air mixture weaker (less fuel in relation to the amount of air) and turning them anti-clockwise makes the fuel/air mixture richer. A weak mixture increases the engine speed and a rich mixture decreases the engine speed. The T screw controls the throttle position when idling. Turning the T screw clockwise gives faster idling; turning it anti-clockwise lowers idling speed (see manual for complete guide).

Carburetor Type: Walbro WT-498-1 (see manual for updated specs)

See the complete Stihl 011 AVEQ service workshop manual, carburetor manual, parts list, operator manual and technical supplements PDF downloads, also the repair and service articles available on this website for more information on how to service, repair and find parts for the chainsaw.

Stihl 011 AVEQ Chainsaw Specifications

ENGINE DISPLACEMENT: 40.8 ccm (2.45 cu. in.)
NUMBER OF CYLINDERS:1
CYLINDER BORE:38 mm (1.50 in.)
PISTON STROKE:36 mm (1.42 in.)
CYLINDER TYPE: Aluminum with a chrome-plated bore
INTAKE METHOD: Piston ported
WEIGHT:9.7 lbs.
HANDLEBAR SYSTEM: Anti-vibration
CHAIN BRAKE: Optional on Q model
CLUTCH: Centrifugal
DRIVE TYPE: Direct
CONSTRUCTION: Injection molded polymer, die-cast magnesium
MAGNETO TYPE: Flywheel magneto
CARBURETOR: Walbro WT-498-1
AIR FILTER SYSTEM: Felt element
STARTER TYPE: Automatic rewind
OIL PUMP:Automatic, diaphragm & plunger type
IGNITION TIMING:1.8 to 2.1 mm (0.071 to 0.83 in.) before TDC
BREAKER POINT SETTING:0.3 to 0.4 mm (0.012 to 0.016 in.)
FLYWHEEL/COIL AIR GAP:0.2 mm (0.008 in.)
SPARK PLUG TYPE: Bosch WSR6F, Champion RCJ7Y
SPARK PLUG GAP:0.51 mm (0.020 in.)
CRANKSHAFT MAIN BEARINGS: Caged needle roller
FUEL OIL RATIO:40:1 with Stihl oil
RECOMMENDED FUEL OCTANE: Regular grade
MIX OIL SPECIFICATION: Stihl two-cycle chain saw mix oil
CHAIN PITCH:3/8 in. low profile “Pico”
CHAIN TYPE: Stihl Pico
SHORTEST GUIDE BAR SUPPLIED:30 cm (12 in.)
LONGEST GUIDE BAR SUPPLIED:40 cm (16 in.)

Stihl 011 AVEQ Service Workshop Manual PDF

* Online preview