Stihl 011 Operator Manual
Stihl 011 operator manual for the 011 chainsaw. PDF download operator instructions on how to use and maintain the Stihl 011 (11 series) chainsaw. Clear and concise with easy to understand diagrams detailing the safety, operating, maintaining and storing of the chainsaw.
Stihl 011 Chainsaw Operator Manual Contents
Safety, cutting attachment, bar and chain, fuel, oil, chain brake, stopping/starting engine, adjusting carburetor, air filter, engine management, spark plug, chain sprocket, sharpening the chain, maintenance and care, specifications.
This is The Stihl 011 User Guide
More information for the service and repair of the Stihl 011 chainsaw can be found in the service workshop manual, parts list and any technical notes available for PDF download or online viewing on this website. Also check out any questions and answers, articles or the full specifications pages for the 011 chainsaw.
Adjusting Stihl 011 Carburetor
Stihl 011 chainsaw carburetor guide- The carburetor has been factory adjusted to provide the optimal engine air/fuel flow. Instructions for standard settings to adjust the idling screw, turning either clockwise or counter clockwise. Learn how to set the idling screw correctly if the engine is cutting out or idling incorrectly. Learn how to check the spark plug for a good electrical spark, cleaning or replacing if required. Air filter cleaning and replacement is described in the operator manual. A carburetor PDF manual is available from this website.
Stihl 011 Chainsaw Specifications
ENGINE DISPLACEMENT: 40.8 ccm (2.45 cu. in.)
NUMBER OF CYLINDERS:1
CYLINDER BORE:38 mm (1.50 in.)
PISTON STROKE:36 mm (1.42 in.)
CYLINDER TYPE: Aluminum with a chrome-plated bore
INTAKE METHOD: Piston ported
WEIGHT:9.7 lbs.
HANDLEBAR SYSTEM: Anti-vibration
CHAIN BRAKE: Optional on Q model
CLUTCH: Centrifugal
DRIVE TYPE: Direct
CONSTRUCTION: Injection molded polymer, die-cast magnesium
MAGNETO TYPE: Flywheel magneto
CARBURETOR:
AIR FILTER SYSTEM: Felt element
STARTER TYPE: Automatic rewind
OIL PUMP:Automatic, diaphragm & plunger type
IGNITION TIMING:1.8 to 2.1 mm (0.071 to 0.83 in.) before TDC
BREAKER POINT SETTING:0.3 to 0.4 mm (0.012 to 0.016 in.)
FLYWHEEL/COIL AIR GAP:0.2 mm (0.008 in.)
SPARK PLUG TYPE: Bosch WSR6F, Champion RCJ7Y
SPARK PLUG GAP:0.51 mm (0.020 in.)
CRANKSHAFT MAIN BEARINGS: Caged needle roller
FUEL OIL RATIO:40:1 with Stihl oil
RECOMMENDED FUEL OCTANE: Regular grade
MIX OIL SPECIFICATION: Stihl two-cycle chain saw mix oil
CHAIN PITCH:3/8 in. low profile “Pico”
CHAIN TYPE: Stihl Pico
SHORTEST GUIDE BAR SUPPLIED:30 cm (12 in.)
LONGEST GUIDE BAR SUPPLIED:40 cm (16 in.)
Stihl 011 Operator Manual PDF
* Online preview