Stihl 020T Operator Manual
Stihl 020T operator manual for the 020T chainsaw. PDF download operator instructions on how to use and maintain the Stihl 020T (20 series) chainsaw. Clear and concise with easy to understand diagrams detailing the safety, operating, maintaining and storing of the chainsaw.
Stihl 020T Chainsaw Operator Manual Contents
Safety, cutting attachment, bar and chain, fuel, oil, chain brake, stopping/starting engine, adjusting carburetor, air filter, engine management, spark plug, chain sprocket, sharpening the chain, maintenance and care, specifications.
This is The Stihl 020T User Guide, owner manual.
More information for the service and repair of the Stihl 020T chainsaw can be found in the service workshop manual, parts list and any technical notes available for PDF download or online viewing on this website. Also check out any questions and answers, articles or the full specifications pages for the 020T chainsaw.
Adjusting Stihl 020T Carburetor
Stihl 020T chainsaw carburetor guide- The carburetor has been factory adjusted to provide the optimal engine air/fuel flow. Instructions for standard settings to adjust the idling screw, turning either clockwise or counter clockwise. Learn how to set the idling screw correctly if the engine is cutting out or idling incorrectly. Learn how to check the spark plug for a good electrical spark, cleaning or replacing if required. Air filter cleaning and replacement is described in the operator manual. A carburetor PDF manual is available from this website.
Stihl 020T Chainsaw Specifications
SERIES OR ASSEMBLY NUMBER: 1114
ENGINE DISPLACEMENT: 32ccm (1.96 cu. in.)
CYLINDER BORE: 38mm (1.496 in.)
PISTON STROKE: 28mm (1.102 in.)
CYLINDER TYPE: Aluminum with chrome plated bore
INTAKE METHOD: Piston ported
WEIGHT: 4.4kg with 30cm bar & chain 9.7 lbs. with 12 in. bar & chain
MAGNETO TYPE: Bosch flywheel
CARBURETOR: Tillotson HU-7A series
MAJOR REPAIR KIT: RK-14HU
MINOR REPAIR KIT: DG-2HU
AIR FILTER SYSTEM: Wire screen element
STARTER TYPE: Stihl automatic rewind
OIL PUMP: Automatic
MAXIMUM ENGINE RPM: 12,500
IDLE RPM: 2,800
IGNITION TIMING: 2 to 2.2mm (0.079 to 0.087 in before TDC
BREAKER POINT SETTING: 0.4 mm (0.016 in.)
SPARK PLUG TYPE: Bosch WKA 175 T 6
SPARK PLUG GAP: 0.5mm (0.020 in.)
FUEL TANK CAPACITY: 400ml
FUEL OIL RATIO: 40:1 with Stihl oil
RECOMMENDED FUEL OCTANE: Regular
MIX OIL SPECIFICATION: Stihl two-cycle chain saw mix oil
CHAIN PITCH: 1/4 in. on early production, then 3/8″ low profile
SHORTEST GUIDE BAR SUPPLIED: 30cm (12 in.)
LONGEST GUIDE BAR SUPPLIED: 40cm (16 in.)
Stihl 020T Operator Manual PDF
* Online preview