Stihl 030 Workshop Service Manual

Stihl 030 Workshop Service Manual Repair

Stihl 030 Workshop Manual for the Repair and service of the Stihl 030 chainsaw (030). The PDF workshop service manual has accurate, easy to understand information and diagrams to help repair and service, information to help you to troubleshoot, repair and fix the Stihl 030 chainsaw (030). View pages online or download a complete PDF service manual that you can easily save, print or view on any device. This complete PDF manual is an Instant download.

Stihl 030 Workshop Service Manual Contents

Contents, Introduction, Safety Regulations, Symbols, Technical data, Service tools, Service data, Safety equipment, Starter, Electrical system, Centrifugal clutch, Lubrication system, Carburetor, Tank unit, Anti-vibration system, Piston and cylinder, Crankcase and crankshaft, Troubleshooting, Repair Instructions.

Carburetor – General Chainsaw Adjustment

Adjusting the carburettor involves adjusting the engine to the local conditions e.g. climate, altitude, fuel and type of two-stroke oil. The carburettor is equipped with three adjustment options.
L = Low speed jet
H = High speed jet
T = Idling adjustment screw

The L and H jets adjust the fuel flow to match the airflow that the throttle valve opening allows. Turning them clockwise makes the fuel/air mixture weaker (less fuel in relation to the amount of air) and turning them anti-clockwise makes the fuel/air mixture richer. A weak mixture increases the engine speed and a rich mixture decreases the engine speed. The T screw controls the throttle position when idling. Turning the T screw clockwise gives faster idling; turning it anti-clockwise lowers idling speed (see manual for complete guide).

Carburetor Type: Walbro WA-2C

See the complete Stihh 030 service workshop manual, carburetor manual, parts list, operator manual and technical supplements PDF downloads, also the repair and service articles available on this website for more information on how to service, repair and find parts for the chainsaw.

Stihl 030 Chainsaw Specifications

SERIES OR ASSEMBLY NUMBER: 1113
YEAR INTRODUCED: 1970
YEAR DISCONTINUED:
ENGINE DISPLACEMENT: 45ccm (2.745 cu. in.)
NUMBER OF CYLINDERS: 1
CYLINDER BORE: 42mm (1.66 in.)
PISTON STROKE: 32mm (1.26 in.)
PISTON RING THICKNESS:
CYLINDER TYPE: Aluminum with chrome plated bore
INTAKE METHOD: Piston ported
MANUFACTURER ADVERTISED H.P.:
WEIGHT: 6.4kg with 33cm bar & chain, 14 lbs. with 13 in. bar & chain
HANDLEBAR SYSTEM:
CHAIN BRAKE:
CLUTCH: Centrifugal
DRIVE TYPE: Direct
CONSTRUCTION: Die cast magnesium
MAGNETO TYPE: Bosch flywheel magneto
CARBURETOR: Walbro WA-2C
MAJOR REPAIR KIT: RK-14HU
MINOR REPAIR KIT: DG-2HU
AIR FILTER SYSTEM: Flocked wire screen cartridge
STARTER TYPE: Stihl automatic rewind
OIL PUMP: Automatic
MAXIMUM ENGINE RPM:
IDLE RPM:
IGNITION TIMING: 2.0 mm + 0.3 mm (0.08 in. + 0.012 mm) before TDC
BREAKER POINT SETTING: 0.40mm (0.016 in.)
FLYWHEEL/COIL AIR GAP:
SPARK PLUG TYPE: Bosch WSR6F
SPARK PLUG GAP: 0.5mm (0.020 in.)
CRANKSHAFT MAIN BEARINGS: Ball
FUEL TANK CAPACITY: 450ml (0.95 U.S. Pint)
FUEL OIL RATIO: 40:1 with Stihl oil
RECOMMENDED FUEL OCTANE: Regular
MIX OIL SPECIFICATION: Stihl two-cycle chain saw mix oil
CHAIN PITCH: 3/8 in.
CHAIN TYPE: Stihl
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED: 33cm (13 in.)
LONGEST GUIDE BAR SUPPLIED: 50cm (20 in.)

The Stihl 030 chainsaw uses the Stihl 031, 032 Service Workshop Manual (no service manual was actually produced for the chainsaw, as parts are the same only model numbers differ please use this manual. See manuals for more chainsaw specs..

Stihl 030 Workshop Service Manual PDF

* Online preview