Stihl 034 Operator Manual
Stihl 034 operator manual for the 034 chainsaw. PDF download operator instructions on how to use and maintain the Stihl 034 (34 series) chainsaw. Clear and concise with easy to understand diagrams detailing the safety, operating, maintaining and storing of the chainsaw.
Stihl 034 Chainsaw Operator Manual Contents
Safety, cutting attachment, bar and chain, fuel, oil, chain brake, stopping/starting engine, adjusting carburetor, air filter, engine management, spark plug, chain sprocket, sharpening the chain, maintenance and care, specifications.
This is The Stihl 034 User Guide, owner manual.
More information for the service and repair of the Stihl 034 chainsaw can be found in the service workshop manual, parts list and any technical notes available for PDF download or online viewing on this website. Also check out any questions and answers, articles or the full specifications pages for the 034 chainsaw.
Adjusting Stihl 034 Carburetor
Stihl 034 chainsaw carburetor guide- The carburetor has been factory adjusted to provide the optimal engine air/fuel flow. Instructions for standard settings to adjust the idling screw, turning either clockwise or counter clockwise. Learn how to set the idling screw correctly if the engine is cutting out or idling incorrectly. Learn how to check the spark plug for a good electrical spark, cleaning or replacing if required. Air filter cleaning and replacement is described in the operator manual. Detailed carburetor PDF manuals are available from this website.
Stihl 034 Chainsaw Specifications
SERIES OR ASSEMBLY NUMBER: 1125
YEAR INTRODUCED: 1984
ENGINE DISPLACEMENT: 56.5 ccm (3.45 cu. in.)
NUMBER OF CYLINDERS: 1
CYLINDER BORE: 46 mm (1.81 in.)
PISTON STROKE: 34 mm (1.34 in.)
CYLINDER TYPE: Aluminum with a chrome-plated bore
INTAKE METHOD: Piston ported
WEIGHT: 11.6 lbs.
HANDLEBAR SYSTEM: Anti-vibration
CHAIN BRAKE: Optional on Q model
CLUTCH: Centrifugal
DRIVE TYPE: Direct
CONSTRUCTION: Injection moulded polymer, die-cast magnesium
MAGNETO TYPE: Electronic
CARBURETOR: Tillotson HK-43A, B series, ZAMA C3A-S19, S31-E, S38-B series
MAJOR REPAIR KIT: RK-33HK for HK-43A, B, RB-31 for Zama
MINOR REPAIR KIT: DG-1HK for HK-43A, B, GND-21 for Zama
AIR FILTER SYSTEM: Nylon mesh cartridge
STARTER TYPE: Automatic rewind
OIL PUMP: Automatic, gear-driven, adjustable
MAXIMUM ENGINE RPM: 13,500
IDLE RPM: 2,700
IGNITION TIMING: Fixed
BREAKER POINT SETTING: none
FLYWHEEL/COIL AIR GAP: 0.2 to 0.3 mm (0.008 to 0.012 in.)
SPARK PLUG TYPE: Bosch WSRF, NGK BPMR7A, Champion RCJ7Y
SPARK PLUG GAP: 0.51 mm (0.020 in.)
CRANKSHAFT MAIN BEARINGS: Ball
FUEL OIL RATIO: 50:1 with Stihl oil
RECOMMENDED FUEL OCTANE: Regular grade MIX
OIL SPECIFICATION: Stihl two-cycle chain saw mix oil
CHAIN PITCH: 3/8 in.
Stihl 034 Operator Manual PDF
* Online preview