Stihl 036 Pro Workshop Manual

Stihl 036 Pro Service Workshop Manual Repair

Stihl 036 Pro Service Workshop Manual for the Repair and service of 036 Pro chainsaws. The PDF manual has diagrams and detailed information to troubleshoot and repair the chainsaw. View free page images online or download a full digital PDF that you can easily save, print or view on all devices

Stihl 036 pro manual

The Stihl 036 Pro saw was first manufactured in 1986 and was made until 2003, this Stihl 036 pro manual covers all 036 models. 2002 saw it change its name to the MS 360 although that branding was short-lived as it stopped being made the following year, 2003. It is a professional petrol saw which has a rather large displacement of 61,5 cm³ which means it is a powerful saw for its weight.

The Stihl 036 pro Workshop Manual is a complete service manual.

This is a pdf format which contains clear exploded diagrams to help you quickly repair your Stihl 036 pro chainsaw.

Stihl 036 pro manual

Contents of the Stihl 036 pro parts list manual:

Introduction, Specifications, Clutch, Engine, Ignition system, Rewind starter, Throttle control, Fuel system, Carburettor, Av system, Shaft, Cutting tool drive, Support frame, Special servicing tools and aids

This Stihl chainsaw has a two-stroke, single-cylinder engine. The engine moves at speeds up to 13,500 rpm when in operation, and the idle speed is 2,500 rpm. The engine displacement is 3.75 cubic inches., and this refers to the total volume the pistons can move through the cylinder. The engine stroke is 1.34 inches, and this refers to the total length the pistons can travel within the cylinder. The engine bore (cylinder diameter) is 1.89 inches. The oil tank can hold up to 0.68 pints of oil, and the fuel tank holds up to 1.32 pints. This chainsaw uses a two-stroke engine oil and unleaded gasoline mixture on a 50 to 1 ratio. The chainsaw features a reciprocating oil pump.

Stihl 036 Pro Chainsaw Specifications

SERIES OR ASSEMBLY NUMBER: 1125
YEAR INTRODUCED: 1993
ENGINE DISPLACEMENT: 61.5 ccm (3.75 cu. in.)
NUMBER OF CYLINDERS: 1
CYLINDER BORE: 48 mm (1.89 in.)
PISTON STROKE: 34 mm (1.34 in.)
CYLINDER TYPE: Aluminum with a chrome-plated bore
INTAKE METHOD: Piston ported
MANUFACTURER ADVERTISED H.P.: 4.5 B.H.P.
HANDLEBAR SYSTEM: Anti-vibration
CHAIN BRAKE: Yes
CLUTCH: Centrifugal
DRIVE TYPE: Direct
CONSTRUCTION: Injection-moulded polymer, die-cast magnesium
MAGNETO TYPE: Electronic
CARBURETOR:
ZAMA C3A-S39-B series
MAJOR REPAIR KIT: RB-31
MINOR REPAIR KIT: GND-21
AIR FILTER SYSTEM: Nylon mesh cartridge
STARTER TYPE: Automatic rewind
OIL PUMP: Automatic, gear-driven, adjustable
MAXIMUM ENGINE RPM: 10,500
IDLE RPM: 2,800
IGNITION TIMING: Fixed
BREAKER POINT SETTING: none
FLYWHEEL/COIL AIR GAP: 0.2 to 0.3 mm (0.008 to 0.012 in.)
SPARK PLUG TYPE: Bosch WSR6F, NGK BPMR7A, Champion RCJ7Y
SPARK PLUG GAP: 0.51 mm (0.020 in.)
CRANKSHAFT MAIN BEARINGS: Ball
FUEL OIL RATIO: 50:1 with Stihl oil
Regular grade MIX OIL SPECIFICATION: Stihl two-cycle chain saw mix oil
CHAIN PITCH: 3/8 in.

Stihl 036 Pro Service Workshop Manual PDF

* Online preview