Stihl MS 201 C-M Operator Manual
Stihl MS 201 C-M operator manual for the MS 201 C-M chainsaw. PDF download operator instructions on how to use and maintain the Stihl MS 201 C-M (MS201C-M chainsaw) chainsaw. Clear and concise with easy to understand diagrams detailing the safety, operating, maintaining and storing of the chainsaw.
Stihl MS 201 C-M Chainsaw Operator Manual Contents
Safety, cutting attachment, bar and chain, fuel, oil, chain brake, stopping/starting engine, adjusting carburetor, air filter, engine management, spark plug, chain sprocket, sharpening the chain, maintenance and care, specifications.
This is The Stihl MS 201 C-M User Guide, owner manual.
More information for the service and repair of the Stihl MS 201 C-M chainsaw can be found in any service workshop manual, parts list, carburetor manual and any technical notes available for PDF download or online viewing on this website. Also check out any questions and answers, articles or the full specifications pages for the MS 201 C-M chainsaw.
Adjusting Stihl MS 201 C-M Carburetor
Stihl MS 201 C-M chainsaw carburetor guide- The carburetor has been factory adjusted to provide the optimal engine air/fuel flow. Instructions for standard settings to adjust the idling screw, turning either clockwise or counter clockwise. Learn how to set the idling screw correctly if the engine is cutting out or idling incorrectly. Learn how to check the spark plug for a good electrical spark, cleaning or replacing if required. Air filter cleaning and replacement is described in the operator manual. Detailed carburetor PDF manuals are available from this website.
Stihl MS 201 C-M Chainsaw Specifications
Single cylinder two-stroke engine
Displacement: 35,2 cm³
Power output: 1,8/2,4 kW/bhp
Weight: 3,9 kg
Power-to-weight ratio: 2,2 kg/kW
Sound pressure level: 99 dB(A)
Sound power level: 112 dB(A)
Vibration level left/right: 3,3/3,3 m/s²
Saw chain pitch: 3/8″P
STIHL Oilomatic saw chain type: Picco Super (PS)
STIHL M-Tronic (M)
For a cold start, the STIHL M-Tronic only needs one start position on the combi-lever. After starting, you can immediately power up to full speed. The amount of fuel required is precisely calculated by the system and supplied as needed. Otherwise, start in position I as usual.
Controlled-delivery oil pump
Different bar lengths, wood types and sawing techniques require different amounts of oil. The controlled-delivery oil pump allows the user to select just the right amount of oil for the job at hand.
This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn’t need to be cleaned until an appreciable drop in power occurs.
As M-Tronic has electronic cold and warm start recognition, only one start position is needed on the combi lever. The exact amount of fuel is supplied on demand. You do not need to know about the status of your chainsaw and can apply full throttle straight away – even with a cold start. Because the saw is warmed up by optimum acceleration in a few seconds.
Single-lever master control
All important functions such as start, choke, throttle and stop are operated via a single lever.
Stihl MS 201 C-M Operator Manual PDF
* Online preview