The Husqvarna 35VR chainsaw was introduced in 1977 by the renowned Swedish manufacturer, Husqvarna. It was a popular model among loggers and homeowners alike, known for its reliability and ease of use. The 35VR remained in production for an unspecified amount of time before eventually being discontinued.
Featuring a 38cc engine with a 42mm cylinder bore and a chrome-plated aluminum cylinder, the 35VR weighed 5.5 kg with a 35cm bar and chain. It also boasted an anti-vibration handlebar system, automatic rewind starter, and gear-driven oil pump.
The chainsaw was designed for one-man operation and included a die-cast magnesium construction, caged needle roller crankshaft bearings, and fixed ignition timing. The Husqvarna 35VR was manufactured not only in Sweden but also in Germany by SOLO. This model remains a beloved classic collector saw among chainsaw enthusiasts to this day.
Specifications chart
| Specification | Description |
|---|---|
| Manufactured by | Husqvarna Vapenfabriks AB Huskvarna, Sweden |
| Year Introduced | 1977 |
| Year Discontinued | N/A |
| Engine Displacement | 38ccm (2.32 cu. in.) |
| Cylinder Bore | 42 mm |
| Piston Stroke | 28 mm (1.102 in.) |
| Cylinder Type | Aluminum with Chrome plated bore |
| Intake Method | Piston ported |
| Weight | 5.5 kg with 35 cm bar & chain |
| Operator Configuration | One Man operation |
| Handlebar System | Anti-vibration |
| Chain Brake | None |
| Clutch | Centrifugal |
| Drive Type | Direct |
| Construction | Die-cast Magnesium |
| Magneto Type | Phelon |
| Carburetor | Walbro HDC-29, 52 |
| Major Repair Kit | K10-HDC |
| Minor Repair Kit | D10-HDC |
| Air Filter System | Cellulose fiber element |
| Starter Type | Automatic rewind |
| Oil Pump | Automatic, gear driven |
| Maximum Engine RPM | 9,000 |
| Ignition Timing | Fixed |
| Breaker Point Setting | 0.35 to 0.45 mm (0.014 to 0.017 in.) |
| Flywheel/Coil Air Gap | 0.25 mm (0.010 in.) |
| Spark Plug Type | Bosch WKA 175T6 |
| Spark Plug Gap | 0.5 mm (0.020 in.) |
| Crankshaft Main Bearings | Caged needle roller |
| Fuel Tank Capacity | 350 ml |
| Fuel Oil Ratio | 20:1 for break-in then 25:1 mix |
| Recommended Fuel Octane | Regular |
| Mix Oil Specification | Two-cycle mix oil |
| Chain Pitch | 3/8 low profile |
| Chain Type | 91 |
| Bar Mount Pattern | 01 link |
| Shortest Guide Bar Supplied | 30 cm (12 in.) |
| Longest Guide Bar Supplied | 35 cm (14 in.) |
| Color Scheme | Husqvarna Orange, White starter housing, Black handles |
| Illustrated Parts List | Yes |
| Service Manual | Yes |
| Comments | This model was manufactured by SOLO in Germany. |
In conclusion, the Husqvarna 35VR chainsaw, introduced in 1977, was a popular one-man operation chainsaw with a 38cc engine displacement and a die-cast magnesium construction. Manufactured by Husqvarna, Sweden, the 35VR was known for its anti-vibration handlebar system and automatic oil pump. While this model was discontinued at some point, it remains a sought-after vintage chainsaw for collectors and enthusiasts alike.