Husqvarna 460 Rancher Specifications

Husqvarna 460 Rancher Specifications

The Husqvarna 460 Rancher chainsaw is a powerful and reliable tool for homeowners and professionals alike. With its rugged construction and dependable performance, it has become a trusted companion for those who demand the best from their equipment. Manufactured by Husqvarna Vapenfabriks AB in Huskvarna, Sweden, the 460 Rancher was introduced in 2005 under the series or assembly number 966-0483-20. It remained in production until 2019 when it was discontinued.

Featuring a 60.3 cc (3.68 cu. in.) engine with an aluminum chrome-plated bore cylinder, the 460 Rancher is designed to handle even the toughest cutting jobs. Its piston ported intake method and centrifugal clutch make for easy starting and smooth operation, while the anti-vibration handlebar system and inertia-activated chain brake help reduce operator fatigue and improve safety.

The 460 Rancher also boasts a nylon mesh cartridge air filter system and automatic oil pump, ensuring that the engine stays clean and lubricated even during prolonged use. The spark plug type is Champion RCJ7Y with a spark plug gap of 0.5 mm (0.020 in.), while the crankshaft main bearings are ball bearings.

Whether you’re clearing brush, felling trees, or cutting firewood, the Husqvarna 460 Rancher chainsaw is up to the task. Its vibrant Husqvarna Orange color scheme and illustrated parts list and service manual add to the overall appeal of this workhorse of a tool.

Specifications Chart

Manufactured byHusqvarna Vapenfabriks AB, Huskvarna, Sweden
Series or assembly number966-0483-20
Engine displacement60.3 cc (3.68 cu. in.)
Cylinder typeAluminum with chrome plated bore
Intake methodPiston ported
Handlebar systemAnti-vibration
Chain brakeInertia activated
Drive TypeDirect
Air filter systemNylon mesh cartridge
Starter typeHusqvarna automatic rewind
Oil pumpAutomatic
Ignition timingFixed
Breaker point settingNone
Spark plug typeChampion RCJ7Y
Spark plug gap0.5 mm (0.020 in.)
Crankshaft main bearingsBall
Fuel oil ratio50:1
Mix oil specificationHusqvarna two-cycle or equivalent
Color schemeHusqvarna Orange
Illustrated parts listYes
Service manualYes
Husqvarna 460 Rancher chainsaw Specs

In conclusion, the Husqvarna 460 Rancher chainsaw is a high-quality tool manufactured by Husqvarna Vapenfabriks AB in Huskvarna, Sweden. This chainsaw features a powerful 60.3 cc engine with an aluminum chrome plated bore and a piston ported intake method. Its handlebar system is designed to reduce vibrations while in use, and its chain brake is inertia activated for added safety. The clutch is centrifugal, and the drive type is direct.

The air filter system is a nylon mesh cartridge, and the starter is an automatic rewind system. The chainsaw uses an automatic oil pump and has a fixed ignition timing with no breaker point setting required. The spark plug type is Champion RCJ7Y, and the recommended fuel oil ratio is 50:1 with Husqvarna two-cycle or equivalent mix oil specification. The chainsaw is designed with a Husqvarna Orange color scheme and comes with an illustrated parts list and service manual for easy maintenance.

Leave a Reply

Your email address will not be published. Required fields are marked *

Works On Any Device

Customer Help

Check email for validation link

No purchase necessary