The Husqvarna 42 chainsaw was a reliable workhorse in its time, manufactured by Husqvarna, Sweden. This chainsaw was introduced to the market in 1988 and quickly became a popular choice among professionals and homeowners alike. Its powerful 2.9 horsepower engine with a 42cc displacement, combined with an anti-vibration handlebar system and an inertia-activated chain brake, made the Husqvarna 42 a top-performing chainsaw in its class.
Unfortunately, this chainsaw was discontinued in 1995, but it still holds a special place in the hearts of many who appreciated its performance and durability. Let’s take a closer look at the specs of the Husqvarna 42 chainsaw.
Specifications Chart
| Specification | Value |
|---|---|
| Manufactured by | Husqvarna Vapenfabriks AB Huskvarna, Sweden |
| Year introduced | 1988 |
| Year discontinued | 1995 |
| Engine displacement | 42ccm (2.5 cu. in.) |
| Cylinder bore | 42 mm (1.65 in.) |
| Piston stroke | 30 mm (1.18 in.) |
| Piston ring thickness | 1.5 mm |
| Cylinder type | Aluminum with a chrome-plated bore |
| Intake method | Piston ported |
| Manufacturer advertised HP | 2.9 hp (2.1 kW) |
| Weight | 4.7 kg (10.4 lbs.), powerhead only |
| Handlebar system | Anti-vibration |
| Chain brake | Inertia activated |
| Clutch | Centrifugal |
| Drive Type | Direct |
| Construction | Die-cast magnesium, injection-molded polymer |
| Magneto type | Electronic SEM AM7 |
| Carburetor | Walbro HDA-34A, 84, 98, 108 series |
| Major repair kit | K20-HDA |
| Minor repair kit | D10-HDA |
| Air filter system | Nylon mesh cartridge |
| Starter type | Automatic rewind |
| Oil pump | Automatic, worm gear driven |
| Maximum engine RPM | 14,500 max free after break-in, 9,300 under load |
| Idle RPM | 2,700 |
| Ignition timing | Fixed |
| Breaker point setting | None |
| Flywheel/coil air gap | 0.30 mm (0.012 in.) |
| Spark plug type | Champion RCJ7Y, Bosch WS7F |
| Spark plug gap | 0.5 mm (0.020 in.) |
| Crankshaft main bearings | Ball |
| Fuel tank capacity | 520 ml (17.6 fl. oz.) |
| Fuel oil ratio | 50:1 |
| Recommended fuel octane | Regular grade |
| Mix oil specification | Electrolux approved mix oil, Husqvarna mix oil |
| Chain pitch | .325 in. |
| Chain type | Oregon 20LP, 21LP |
| Bar mount pattern | 01 link |
| Shortest guide bar supplied | 33 cm (13 in.) |
| Longest guide bar supplied | 45 cm (18 in.) |
| Color scheme | Husqvarna orange |
| Illustrated parts list | Yes |
| Service manual | Yes |
In conclusion, the Husqvarna 42 chainsaw was an impressive piece of equipment that offered power and precision for its time. Manufactured by Husqvarna Vapenfabriks AB in Huskvarna, Sweden, the chainsaw was introduced in 1988 and discontinued in 1995. With a 42cc engine, aluminum cylinder with a chrome-plated bore, and anti-vibration handlebar system, the Husqvarna 42 was a reliable tool that could handle a range of cutting tasks. Its features, such as the centrifugal clutch and inertia-activated chain brake, added to its safety and user-friendly design.
Although no longer in production, the Husqvarna 42 chainsaw has left its mark on the industry as a dependable and powerful tool that could be trusted to get the job done.