The Husqvarna 100 chainsaw, manufactured by Husqvarna Vapenfabriks AB in Huskvarna, Sweden, was first introduced in 1962 and was available in two series or assembly numbers: A and F. With an engine displacement of 100cc (6.1 cu. in.) and a piston stroke of 42mm, this chainsaw was capable of heavy-duty cutting tasks.
Its aluminum cylinder with a chrome-plated bore, piston ported intake method, and Tillotson HL series carburetor made it a reliable and durable option for users. The Husqvarna 100 chainsaw had a maximum engine RPM of 6,000, weighed 11.5 kg, and featured a rigid handlebar system, a centrifugal clutch, and a direct drive type. It was built using die-cast magnesium, with a Bosch magneto type and a nylon mesh cartridge air filter system.
This chainsaw was designed with user-friendliness in mind, featuring an automatic rewind starter type and a manual oil pump built into the clutch cover. Its recommended fuel-oil ratio was 25:1 and could hold up to 1.1 liters of fuel in the tank. The Husqvarna 100 chainsaw had a chain pitch of 7/16 inches and a bar mount pattern of 16 links. It was available with a 33 cm (13 in.) guide bar and came with an illustrated parts list and service manual.
Specifications Chart
| SPECIFICATION | DETAILS |
|---|---|
| Manufactured by | Husqvarna Vapenfabriks AB, Huskvarna, Sweden |
| Series or Assembly Number | A, F |
| Year Introduced | 1962 |
| Engine Displacement | 100cc (6.1 cu. in.) |
| Piston Stroke | 42 mm |
| Cylinder Type | Aluminum with Chrome Plated Bore |
| Intake Method | Piston Ported |
| Manufacturer Advertised H.P. | Not Advertised |
| Weight | 11.5 Kg. |
| Handlebar System | Rigid |
| Chain Brake | None |
| Clutch | Centrifugal |
| Drive Type | Direct |
| Construction | Die Cast Magnesium |
| Magneto Type | Bosch |
| Carburetor | Tillotson HL Series |
| Air Filter System | Nylon Mesh Cartridge |
| Starter Type | Automatic Rewind |
| Oil Pump | Manual, Built into the Clutch Cover |
| Maximum Engine RPM | 6,000 |
| Ignition Timing | 24 Degrees Before TDC |
| Breaker Point Setting | 0.4 mm (0.016 in.) |
| Flywheel/Coil Air Gap | Position Is Fixed |
| Spark Plug Type | Bosch W 225 T1 |
| Spark Plug Gap | 0.51 mm (0.020 in.) |
| Crankshaft Main Bearings | Ball |
| Fuel Tank Capacity | 1.1 Litres |
| Fuel Oil Ratio | 25:1 |
| Recommended Fuel Octane | Regular |
| Mix Oil Specification | Two-Cycle Air-Cooled Engine Oil |
| Chain Pitch | 7/16 in. |
| Bar Mount Pattern | 16 Link |
| Shortest Guide Bar Supplied | 33 cm (13 in.) |
| Color Scheme | Husqvarna Orange and Black |
| Illustrated Parts List | Yes |
| Service Manual | Yes |
In conclusion, the Husqvarna 100 chainsaw was a powerful and durable machine that was manufactured by Husqvarna Vapenfabriks AB in Huskvarna, Sweden. Introduced in 1962, it had a 100cc engine displacement and a rigid handlebar system. With a maximum engine RPM of 6,000 and a weight of 11.5 kg, it was a reliable tool for heavy-duty cutting tasks. The chainsaw also featured a manual oil pump built into the clutch cover and a Tillotson HL series carburetor.
Despite its many useful features, the Husqvarna 100 chainsaw was eventually discontinued, but it remains a popular choice among collectors and vintage chainsaw enthusiasts if you can get your hands on one.