This iconic Husqvarna 22 chainsaw was first introduced in 1973 and quickly became a favorite among loggers and homeowners alike. Its reliable performance and sturdy construction make it a classic choice for any cutting job.
There’s something special about using a tool that’s been around for decades – it’s like holding a piece of history in your hands. The Husky 22 chainsaw has stood the test of time and continues to be a beloved collector’s tool for those who appreciate quality craftsmanship and durability.
Whether you’re a professional logger or a weekend warrior tackling a DIY project, the Husqvarna 22 chainsaw had the power and precision you needed to get the job done right.
Specifications Chart
| Specifications | Value |
|---|---|
| Manufactured by | Husqvarna Vapenfabriks AB, Huskvarna, Sweden |
| Year introduced | 1973 |
| Year discontinued | N/A |
| Engine displacement | 34.4 ccm (2.1 cu. in.) |
| Cylinder bore | 36.5 mm (1.4375 in.) |
| Piston stroke | 32.5 mm (1.281 in.) |
| Cylinder type | Aluminum with chrome plated bore |
| Intake method | Piston ported |
| Weight | 2.77 kg (6 lbs. 11 ounces) powerhead only |
| Handlebar system | Rigid |
| Chain brake | None |
| Clutch | Centrifugal |
| Construction | Die-cast magnesium housings |
| Magneto type | Phelon |
| Carburetor | Tillotson HU-18C or Walbro WA |
| Major repair kit | Tillotson RK-14HU, Walbro K10-WAT |
| Minor repair kit | Tillotson DG-2HU, Walbro D10-WAT |
| Air filter system | Cellulose fiber element |
| Starter type | Automatic rewind |
| Oil pump | Manual |
| Maximum engine RPM | Working 6,500 (no load 12,000) |
| Idle RPM | 2,500 – 2,800 RPM |
| Ignition timing | 25 degrees before TDC |
| Breaker point setting | 0.38 mm (0.15 in.) |
| Flywheel/coil air gap | 0.41 mm (0.016 in.) |
| Spark plug type | Champion CJ6 |
| Spark plug gap | 0.63 mm (0.025 in.) |
| Crankshaft main bearings | Caged needle roller |
| Fuel tank capacity | 275 ml |
| Fuel oil ratio | 16:1 |
| Recommended fuel octane | Regular automotive gasoline |
| Mix oil specification | Chain Saw two-cycle mix |
| Chain pitch | 1/4 in. |
| Chain type | Oregon 25 |
| Shortest guide bar supplied | 30 cm (12 in.) |
| Longest guide bar supplied | 40 cm (16 in.) |
| Color scheme | White |
Features
- Discontinued model, first introduced in 1973
- Lightweight at only 6 pounds 11 ounces
- Rigid handlebar system for stability and control during use
- Powerful engine with 34.4 cc displacement and 2.1 cu. in.
- Aluminum cylinder with chrome-plated bore for durability
- Piston ported intake method for improved engine performance
- Centrifugal clutch for smooth operation and reduced user fatigue
- Die-cast magnesium housing for strength and longevity
- Automatic rewind starter for easy starting
- Manual oil pump for the efficient lubrication of the engine
- Maximum engine RPM of 6,500 (no load 12,000) for high-cutting power
- Guide bars ranging from 12 inches to 16 inches for versatility
- Has a white color scheme for a classic and timeless look
In conclusion, the Husqvarna 22 chainsaw was a reliable and powerful tool for any cutting task. With its lightweight and sturdy design, it offered easy handling and maneuverability, making it suitable for both professional and personal use. Its automatic rewind starter, piston-ported intake method, and centrifugal clutch system make starting and operating the chainsaw a breeze (well almost). Additionally, its die-cast magnesium housing construction and cellulose fiber air filter provide durability and protection against wear and tear. Overall, the Husqvarna 22 chainsaw was a top choice for those seeking a high-quality and efficient cutting tool.