McCulloch Eager Beaver Super 16" Specifications

McCulloch Eager Beaver Super 16″ Specifications

The McCulloch Eager Beaver Super 16″ (Eager Beaver 2.0) chainsaw was first manufactured in 1988 by the McCulloch Motors Corporation in Los Angeles, California, USA. It quickly became popular among homeowners and professionals alike for its lightweight design and efficient performance. In this chainsaw, McCulloch used innovative technologies that made it easier to operate and maintain, making it one of the most reliable and efficient saws of its time.

Specifications

FeatureSpecification
Manufactured byMcCulloch Motors Corp. Los Angeles, California, U.S.A.
Series or Assembly Number600124-04, 06, 09
Year Introduced1988
Engine Displacement2.0 cu. in.
Cylinder Bore1.430 in. (36.5 mm)
Piston Stroke1.201 in. (30.5 mm)
Cylinder TypeAluminum with chrome plated bore
Intake MethodPiston ported
Manufacturer Advertised H.P.Not advertised
Weight9.9 lbs. with 16 in. bar & chain 4.4 kg with 40 cm bar & chain
Operator ConfigurationOne Man operation, top handle saw
Handlebar SystemRigid
Chain BrakeYes
ClutchCentrifugal
Drive TypeDirect
ConstructionDie cast magnesium, injection molded plastic
Magneto TypeBreaker point flywheel type
CarburetorWalbro MDC
Major Repair KitK1MDC
Minor Repair KitD1MDC
Air Filter SystemFlocked wire screen
Starter TypeAutomatic rewind
Oil PumpManual and automatic
Ignition Timing26 degrees before TDC
Breaker Point Setting0.018 in. (0.457 mm)
Flywheel/Coil Air Gap0.012 in. (0.30 mm)
Spark Plug TypeAC CS45T
Spark Plug Gap0.025 in. (0.63 mm)
Crankshaft Main BearingsCaged needle roller
Fuel Tank Capacity10.8 oz. (320 ml)
Fuel Oil Ratio40:1 with McCulloch mix oil
Recommended Fuel OctaneRegular
Mix Oil SpecificationMcCulloch two-cycle chain saw mix oil
Chain Pitch3/8 in. low profile
Chain TypeMcCulloch
Bar Mount Pattern08 link
Shortest Guide Bar Supplied16 in. (40 cm)
Longest Guide Bar Supplied18 in. (45 cm)
Colour SchemeMcCulloch Yellow with Black
McCulloch Eager Beaver Super 16″ Specs

Features

  • Manufactured by McCulloch Motors Corp. in Los Angeles, California, U.S.A.
  • Series or assembly number: 600124-04, 06, 09
  • Year introduced: 1988
  • Engine displacement: 2.0 cu. in.
  • Number of cylinders: 1
  • Cylinder bore: 1.430 in. (36.5 mm)
  • Piston stroke: 1.201 in. (30.5 mm)
  • Cylinder type: Aluminum with chrome plated bore
  • Intake method: Piston ported
  • Manufacturer advertised horsepower: Not advertised
  • Weight: 9.9 lbs. with 16 in. bar & chain (4.4 kg with 40 cm bar & chain)
  • Operator configuration: One man operation, top handle saw
  • Handlebar system: Rigid
  • Chain brake: Yes
  • Clutch: Centrifugal
  • Drive type: Direct
  • Construction: Die cast magnesium, injection molded plastic
  • Magneto type: Breaker point flywheel type
  • Carburetor: Walbro MDC

Conclusion

To sum up, the McCulloch Eager Beaver Super 16″ chainsaw was a popular and reliable chainsaw model manufactured by McCulloch Motors Corp. in Los Angeles, California, USA, and first introduced in 1988. It was a one-man operation, top handle saw that had a rigid handlebar system, a chain brake, and a centrifugal clutch. Its construction consisted of a die-cast magnesium and injection-molded plastic material. The chainsaw was powered by a 2.0 cu. in. engine with one cylinder and a piston stroke of 1.201 in. The recommended fuel-oil ratio was 40:1 with McCulloch mix oil, and it used a 3/8 in. low profile chain pitch with a McCulloch chain type. It had a McCulloch Yellow with Black color scheme and weighed 9.9 lbs. with a 16 in. bar and chain.

The McCulloch Eager Beaver Super 16″ chainsaw is still considered a valuable tool by many professional and amateur users.

Leave a Reply

Your email address will not be published. Required fields are marked *

Works On Any Device

Customer Help

Check email for validation link

No purchase necessary