Husqvarna 130 Workshop Manual Repair
Husqvarna 130 Workshop Manual for the Repair and service of the Husqvarna 130 chainsaw. The PDF workshop service manual has accurate, easy to understand information and diagrams to help repair and service the chainsaw. Service Information to help you to troubleshoot, repair and fix the Husqvarna 130 chainsaw. View pages online or download a complete PDF service manual that you can easily save, print or view on any device.
Husqvarna 130 Workshop Manual Contents
Contents, Introduction, Safety Regulations, Symbols, Technical data, Service tools, Service data, Safety equipment, Starter, Electrical system, Centrifugal clutch, Lubrication system, Carburetor, Tank unit, Anti-vibration system, Piston and cylinder, Crankcase and crankshaft, Troubleshooting, Repair Instructions.
Carburetor – General Chainsaw Adjustment
Adjusting the carburettor involves adjusting the engine to the local conditions e.g. climate, altitude, fuel and type of two-stroke oil. The carburettor is equipped with three adjustment options.
L = Low speed jet
H = High speed jet
T = Idling adjustment screw
The L and H jets adjust the fuel flow to match the airflow that the throttle valve opening allows. Turning them clockwise makes the fuel/air mixture weaker (less fuel in relation to the amount of air) and turning them anti-clockwise makes the fuel/air mixture richer. A weak mixture increases the engine speed and a rich mixture decreases the engine speed. The T screw controls the throttle position when idling. Turning the T screw clockwise gives faster idling; turning it anti-clockwise lowers idling speed (see manual for complete guide).
See the complete service workshop manual, carburetor manual, parts list, operator manual and technical supplements PDF downloads. Also the repair and service articles available on this website for more information on how to service, repair and find parts for the chainsaw.
Husqvarna 130 Chainsaw Specifications
Power output 1.5 kW
Cylinder displacement 38 cm³
Maximum power speed 9000 rpm
Idling speed 3000 rpm
Torque, max. 1.84 Nm
Fuel consumption 725 g/kWh
Fuel consumption 0.725 kg/h
Spark plug NGK BPMR7A
Electrode gap 0.55 mm
Oil pump type Automatic
Bar length (inch) 16″
Recommended bar length, min 35 cm
Recommended bar length, max 40 cm
Chain speed at max power 16.8 m/s
Chain speed at 133% of maximum engine power speed 22.3 m/s
Sprocket type Spur 6
Weight (excl. cutting equipment) 4.7 kg
Oil tank volume .260 l
Oil pump type Automatic
Sound power level, guaranteed (LWA) 116 dB(A)
Sound power level, measured 114.34 dB(A)
Sound pressure level at operators ear 102 dB(A)
Equivalent vibration level (ahv, eq) front handle 3.72 m/s²
Equivalent vibration level (ahv, eq) rear handle 5.5 m/s²
Read the Husqvarna 130 Workshop Manual for more chainsaw specs.
Inertia chain brake: Effective inertia-activated chain brake,
Fuel pump and Smart Start: Fuel pump designed for easy starting so it can reduce the pulls to start the engine.
Quick-release air filter : Facilitates cleaning and replacement of the air filter.
Low Vibration : Effective anti-vibration dampeners absorb vibration, sparing the user’s arms and hands.
Husqvarna 130 Workshop Manual PDF
* Online preview
There are no reviews yet.