Husqvarna 36 Workshop Manual Repair
Husqvarna 36 Workshop Service Manual for the Repair and service of the Husqvarna 36 chainsaw. The PDF workshop service manual has accurate, easy to understand information and diagrams to help repair and service the chainsaw. Service Information to help you to troubleshoot, repair and fix the Husqvarna 36 chainsaw. View pages online or download a complete PDF service manual that you can easily save, print or view on any device.
Husqvarna 36 Workshop Service Manual Contents
Contents, Introduction, Safety Regulations, Symbols, Technical data, Service tools, Service data, Safety equipment, Starter, Electrical system, Centrifugal clutch, Lubrication system, Carburetor, Tank unit, Anti-vibration system, Piston and cylinder, Crankcase and crankshaft, Troubleshooting, Repair Instructions.
Carburetor – General Chainsaw Adjustment
Adjusting the carburettor involves adjusting the engine to the local conditions e.g. climate, altitude, fuel and type of two-stroke oil. The carburettor is equipped with three adjustment options.
L = Low speed jet
H = High speed jet
T = Idling adjustment screw
The L and H jets adjust the fuel flow to match the airflow that the throttle valve opening allows. Turning them clockwise makes the fuel/air mixture weaker (less fuel in relation to the amount of air) and turning them anti-clockwise makes the fuel/air mixture richer. A weak mixture increases the engine speed and a rich mixture decreases the engine speed. The T screw controls the throttle position when idling. Turning the T screw clockwise gives faster idling; turning it anti-clockwise lowers idling speed (see manual for complete guide).
See the complete service workshop manual, carburetor manual, parts list, operator manual and technical supplements PDF downloads. Also the repair and service articles available on this website for more information on how to service, repair and find parts for the chainsaw.
Husqvarna 36 Chainsaw Specifications
YEAR INTRODUCED: 1991
YEAR DISCONTINUED: 1997
ENGINE DISPLACEMENT: 36cc (2.2 cu. in.)
CYLINDER BORE: 38mm (1.50 in.)
PISTON STROKE: 32mm (1.26 in.)
CYLINDER TYPE: Aluminum with a chrome-plated bore
H.P.: 2.2 hp (1.6kW)
WEIGHT: 4.6kg (10.1 lbs.) powerhead only
CHAIN BRAKE: Inertia activated
MAGNETO TYPE: Electronic, Phelon
CARBURETOR: Walbro WT-202, 239 series, ZAMA C1Q-W5, C1Q-W6
STARTER TYPE: Automatic rewind
OIL PUMP: Automatic, non-adjustable
MAXIMUM ENGINE RPM: 13,000 max free after break in, 9,000 under load.
IDLE RPM: 3,000
IGNITION TIMING: fixed
BREAKER POINT SETTING: none
FLYWHEEL/COIL AIR GAP: 0.30 mm (0.012 in.)
SPARK PLUG TYPE: Champion RCJ7Y or Bosch WSR6F
SPARK PLUG GAP: 0.5mm (0.020 in.)
CRANKSHAFT MAIN BEARINGS: Ball
FUEL TANK CAPACITY: 410ml (13.8 oz.)
FUEL OIL RATIO: 50:1
RECOMMENDED FUEL OCTANE: Regular
MIX OIL SPECIFICATION: Two-stroke chain saw mix oil, 50:1 with Husqvarna mix oil
CHAIN PITCH: 3/8 in. low profile
SHORTEST GUIDE BAR SUPPLIED: 33 cm (13 in.)
LONGEST GUIDE BAR SUPPLIED: 45 cm (18 in.)
Read the Husqvarna 36 Workshop Manual for more chainsaw specs.
Husky’s classic vintage chainsaw, ideal for small jobs, light wood work.
Husqvarna 36 Workshop Manual PDF
* Online preview
There are no reviews yet.