Husqvarna 435e Service Workshop Manual Repair
Husqvarna 435e Service Workshop Manual for the Husqvarna chainsaw. Repair and service the 435e with this manual. The manual contains diagrams and accurate information as used by professional mechanics and repair shops to troubleshoot and repair the chainsaw.
Are you looking to repair or maintain your Husqvarna 435 chainsaw? Look no further! You can now view or download a free Husqvarna 435 chainsaw workshop manual.
The manual includes detailed instructions and step-by-step procedures for servicing your chainsaw, as well as troubleshooting and repair tips. From basic maintenance to complex repairs, this manual has got you covered.
Whether you’re a professional or DIY enthusiast, having a workshop manual for your Husqvarna 435 chainsaw is an essential tool for ensuring your equipment is running at its best.
Don’t let a damaged chainsaw slow you down. Get your hands on the Husqvarna 435e Service Workshop Manual and get back to tackling those tough jobs in no time.
Husqvarna 435e Service Workshop Manual Contents
Introduction, Specifications, Troubleshooting Attachments, Clutch, Engine, Ignition, Starter, Servicing, Controls, Fuel System, Special Tools.
The 435e Husqvarna chainsaw PDF manual contains very clear and precise diagrams and instructions. These manuals are designed to get the information you need quickly and easily.
Husky 435e is a 16-inch, 40.9-cc, gasoline-powered chainsaw from Husqvarna weighing 12 lbs. It has a chain brake.
Husqvarna 435e Specifications
Cylinder displacement, cu.in/cm3 2,49/40,9
Cylinder bore, inch/mm 1,61/41
Stroke, inch/mm 1,22/31
Idle speed, rpm 2900
Power, kW/hp @ rpm 1,6/2,2 @ 9000
Manufacturer of ignition system Walbro
Type of ignition system MBU-33
Spark plug NGK BPMR 7A/Champion RCJ 7Y/Husqvarna PR 17Y
Electrode gap, inch/mm 0,02/0,5
Fuel and lubrication system
Manufacturer of carburetor Zama
Carburetor type Zama EL 41
Fuel tank capacity, US pint/litre 0,78/0,37
Oil pump capacity at 9,000 rpm, ml/min 13
Oil tank capacity, US pint/litre 0,53/0,25
Type of oil pump Not adjustable
Chain saw without bar or chain, empty tanks, lb/kg 9,3/4,2
Standard bar length, inch/cm 13″/33
Recommended bar lengths, inch/cm 13-18″/33-46
Usable cutting length, inches/cm 12-17″/31-43
Chain speed at max. power, m/sec 17,3
Your Husqvarna product has been designed and
manufactured to specifications that reduce harmful emissions.
• The carburetor governs the engine’s speed via the
throttle control. Air and fuel are mixed in the
carburetor. The air/fuel mixture is adjustable. Correct
adjustment is essential to get the best performance
from the machine.
• The T-screw regulates the throttle setting at idle
speed. If the T-screw is turned clockwise this gives a
higher idle speed; turning it anti-clockwise gives a
lower idle speed.
Basic settings and running in
The basic carburetor settings are adjusted during testing
at the factory. Fine adjustment should be carried out by a
Rec. idle speed: See the Technical data section.
Fine adjustment of the idling speed T
Adjust the idle speed with the T-screw. If it is necessary to
re-adjust, turn the T-screw clockwise while the engine is
running until the chain starts to rotate. Then turn counterclockwise
until the chain stops. A correctly adjusted idle
speed setting occurs when the engine runs smoothly in
every position. It should also be a good margin to the rpm
when the chain starts to rotate.
Correctly adjusted carburetor
When the carburetor is correctly adjusted the machine
accelerates without hesitation and the machine 4-cycles a
little at max. speed. It is also important that the chain does
not rotate at idle. If the L-jet is set too lean it may cause
starting difficulties and poor acceleration. If the H-jet is set
too lean the machine will have less power, poor
acceleration and could suffer damage to the engine.
Husqvarna 435e Service Workshop Manual PDF
* Online preview
There are no reviews yet.