Husqvarna 455 Rancher II Workshop Manual

$0.00

Husqvarna 455 Rancher II Workshop Manual for the service and repair of the Husqvarna 455 Rancher II chainsaw. View pages online or download a complete PDF manual with clear easy to understand images, diagrams and information. Print or save to any device.

Husqvarna 455 Rancher II Workshop Manual Repair

Husqvarna 455 Rancher II Workshop Manual for the Repair and service of the Husqvarna 455 Rancher II (455 Rancher Mark 2) chainsaw. The PDF workshop service manual has accurate, easy to understand information and diagrams to help repair and service the chainsaw. Service Information to help you to troubleshoot, repair and fix the Husqvarna 455 Rancher II chainsaw. View pages online or download a complete PDF service manual that you can easily save, print or view on any device.

Husqvarna 455 Rancher II Workshop Manual Contents

Contents, Introduction, Safety Regulations, Symbols, Technical data, Service tools, Service data, Safety equipment, Starter, Electrical system, Centrifugal clutch, Lubrication system, Carburetor, Tank unit, Anti-vibration system, Piston and cylinder, Crankcase and crankshaft, Troubleshooting, Repair Instructions.

Carburetor – General Chainsaw Adjustment

Adjusting the carburettor involves adjusting the engine to the local conditions e.g. climate, altitude, fuel and type of two-stroke oil. The carburettor is equipped with three adjustment options.
L = Low speed jet
H = High speed jet
T = Idling adjustment screw

The L and H jets adjust the fuel flow to match the airflow that the throttle valve opening allows. Turning them clockwise makes the fuel/air mixture weaker (less fuel in relation to the amount of air) and turning them anti-clockwise makes the fuel/air mixture richer. A weak mixture increases the engine speed and a rich mixture decreases the engine speed. The T screw controls the throttle position when idling. Turning the T screw clockwise gives faster idling; turning it anti-clockwise lowers idling speed (see manual for complete guide).

See the complete service workshop manual, carburetor manual, parts list, operator manual and technical supplements PDF downloads. Also the repair and service articles available on this website for more information on how to service, repair and find parts for the chainsaw.

Husqvarna 455 Rancher II Chainsaw Specifications

Equipment

Bar length (inch) 20 in
Chain speed at 133% of maximum engine power speed 26.6 m/s
Chain speed at max power 20 m/s
Pitch 3/8″
Recommended bar length, max 24 in
Recommended bar length, max 60 cm
Recommended bar length, min 13 in
Recommended bar length, min 33 cm

 Engine

Cylinder bore 47 mm
Cylinder displacement 55.5 cm³
Cylinder stroke 32 mm
Electrode gap 0.5 mm
Fuel consumption 407 g/kWh
Fuel tank volume 0.44 l
Idling speed 2700 rpm
Ignition module air gap 0.3 mm
Maximum power speed 9000 rpm
Power output 2.6 kW
Power source Petrol
Spark plug NGK BPMR7A, Champion RCJ7Y
Torque, max. 3.2 Nm

 Vibration

Equivalent vibration level (ahv, eq) front handle 3.8 m/s²
Equivalent vibration level (ahv, eq) rear handle 6.9 m/s²

 Lubricant

Oil pump type Automatic
Oil tank volume 0.32 l
 Sound and Noise
Sound power level, guaranteed (LWA) 114 dB(A)
Sound power level, measured 112 dB(A)
Sound pressure level at operators ear 104 dB(A)

 Dimensions

Weight (excl. cutting equipment) 6 kg

* These Technical Specs are provided by the manufacturer at the beginning of the model year. Please be aware that the manufacturer may decide to change these specs at any given time without notice.

Read the Husqvarna 455 Rancher II Workshop Manual for more chainsaw specs.

The Husky 455 Rancher Mark 2 (20″) 55.5cc Chainsaw (3.5 Horse Power).

The 455 Rancher features a 3 piece forged crankshaft, side mounted chain tensioner, quick release air filter with snap lock cover, AIR PURGE, SMART START, AIR INJECTION, LOW VIB and a powerful X-TORQ engine.

  • 3.5HP/55.5cc X-Torq 2-Cycle Engine
  • A powerful, yet highly efficient engine that sips fuel
  • Built-in air injection system reduces emissions and filters debris
  • Trustworthy design capable of going the distance with proper care
  • Perfect for professional tree work and land clearing
  • Upgraded X-Cut® Chain Included
  • Professional-grade quality tested and fine-tuned for years
  • Low stretch, durable, and highly efficient design – stays sharper longer
  • LowVib Vibration Damping System
  • Reduces vibration levels to the operator, which lessens fatigue
  • Smart Start Recoil Starter
  • Designed so the machine starts quickly with minimum effort
  • Air purge removes air from carburetor for easier starting
  • Centrifugal Air Cleaning System
  • Removes larger dust & debris particles
  • Results in fewer air filter cleanings and improved engine life
  • 20-Inch Cutting Bar
  • Side-mounted chain tensioner
  • Automatic Oiler
  • Delivers steady chain lubrication for effective use and safety
  • Inertia Activated Chain Brake
  • Reduces the likelihood of injury due to kickback
  • A feature especially needed when using larger sized bars
  • Three-Piece Crankshaft
  • Forged crankshaft components provide maximum strength
  • Front Handle Ergonomics
  • Better grip and a 7-degree offset handle reduces fatigue

Husqvarna 455 Rancher II Workshop Manual PDF

* Online preview

Reviews

There are no reviews yet.

Be the first to review “Husqvarna 455 Rancher II Workshop Manual”

Your email address will not be published. Required fields are marked *