Husqvarna 565 Workshop Manual

Husqvarna 565 Workshop Manual Repair

Husqvarna 565 Workshop Manual for the Repair and service of the Husqvarna 565 chainsaw. The PDF workshop service manual has accurate, easy to understand information and diagrams to help repair and service the chainsaw. Service Information to help you to troubleshoot, repair and fix the Husqvarna 565 chainsaw. View pages online or download a complete PDF service manual that you can easily save, print or view on any device.

Husqvarna 565 Workshop Manual Contents

Contents, Introduction, Safety Regulations, Symbols, Technical data, Service tools, Service data, Safety equipment, Starter, Electrical system, Centrifugal clutch, Lubrication system, Carburetor, Tank unit, Anti-vibration system, Piston and cylinder, Crankcase and crankshaft, Troubleshooting, Repair Instructions.

See the complete service workshop manual, carburetor manual, parts list, operator manual and technical supplements PDF downloads. Also the repair and service articles available on this website for more information on how to service, repair and find parts for the chainsaw.

Husqvarna 565 Chainsaw Specifications

Cylinder displacement	70.6 cm³
Cylinder displacement	4.3 cu.inch
Power output	5 hp
Maximum power speed	9 300 RPM
Fuel tank volume	1.5 US pint
Fuel consumption	442 g/kWh
Idling speed	2 700 RPM
Spark plug	NGK BPMR7A
Electrode gap	0.02”
Torque (max)	4.2 Nm
Weight (without cutting equipment)	14.3 lbs
Size (Length x Width x Height)	18 x 9.5 x 11.8”
Recommended bar length (min)	15” (38 cm)
Recommended bar length (max)	28” (71 cm)
Oil tank volume	0.7 US pint
Oil pump type	Adjustable flow, no flow at idle
Oil pump capacity (min)
Oil pump capacity (max)
Sound	(LWA) 119 dB(A)
Equivalent vibration level (ahv, eq) front handle	5.2 m/s²
Equivalent vibration level (ahv, eq) rear handle	5.3 m/s²

Read the Husqvarna 565 Workshop Manual for more chainsaw specs.

The Husky 565 chainsaw is a 70cc engine that cranks out 5.0 hp and 4.2 Nm worth of torque. It has a max power speed of 9,300 rpm and idles at 2,700 rpm. It can tackle a bar and chain anywhere from 15″ to 28″.

Husqvarna 565 with next-generation cutting performance, the Husqvarna 565 lets you work faster and more efficiently with long guide bars. Excellent cooling capacity and state-of-the-art filtration empower you to tackle the most demanding tasks. Equipped with revamped AutoTune and Air Injection and offering low vibrations.

Husqvarna has also repositioned the front handle closer to the saw’s center of gravity. The result here is that the user has better maneuverability and control.

The Air Injection feature filters out 98% of incoming dust, giving you better performance with less engine wear. AutoTune, which allows the saw to make quick air/fuel mix adjustments, ensures the right engine setting for optimized performance at all times.

Husqvarna 565 Features

• X-Torq
• Air Injection
• Magnesium crankcase
• Better chip ejection avoids clogging
• Better maneuverability gives full control
• 10 times quicker air/fuel mix adjustment
• Flip-up tank caps
• Soft cut-out system
• Felling sight to last a lifetime
• Visible fuel level
• AutoTune
• Three-piece crankshaft
• Front handle ergonomics
• Side-mounted chain tensioner
• Low vibrations
• Inertia activated chain brake
• Smart Start

565 Design

Front handle ergonomics

The front handle is offset by 7° which provides better grip and reduces fatigue.

Side-mounted chain tensioner

Easier access to the chain tensioning device.

Quick-release air filter & air filter cover

Easily removable air filter, when you need to clean it or replace it.

Flip up tank caps

Easy to open and close when refueling.

Visible fuel level

The fuel tank is transparent, so you can see how much fuel is left.

565 Durability

Air Injection

The centrifugal air cleaning system prevents larger dust and debris particles from reaching the air filter. In return, you get improved engine life and less maintenance cleaning the air filter.

Magnesium crankcase

Sturdily built crankcase withstands high RPMs and tough professional use. This ensures a long service life.

Soft cut-out system

System for engine control designed to providea long engine life. It monitors the engine and assures that it’s always protected from over-revving.

565 Felling sight to last a lifetime

Perfect sight is critical when felling. Distinct, colored marks on the chainsaw body used for aiming the direction of tree fall.

Safety

LowVib

The vibration dampening system called LowVib is present in all Husky chainsaws. Metal springs in the engine suspension reduce vibrations felt by the operator. This allows you to work longer without your hands getting exhausted and it also prevents developing medical conditions.

Inertia activated chain brake

In the case of kickback, the inertia mechanism will stop the chain from running. This significantly reduces the risk of injury.

565 Performance

Better wood chip ejection avoids clogging

The clutch cover is designed to optimise rapid, safe saw chip ejection. Prevents clogging, even when cutting long fibre wood.

Better maneuverability gives full control

The front handle bar position is close to the center of gravity, which gives you better cutting control.

X-Torq

Probably the best thing about newer Husqvarna saws. It reduces emissions by up to 75% and fuel consumption by up to 20%. You spend less on gas and breathe fewer fumes. It also makes the saw CARB compliant.

AutoTune

Gives optimal engine performance throughout automatic engine setting. No time spent on carburetor adjustments. It compensates for different fuels, altitude, humidity, temperature and clogged air filter.

Smart Start

Engine and starter design to start the machine quickly with minimum effort.

Husqvarna 565 Auto Tune Reset

Start the chainsaw and run it in the Cold start position for at least 90 seconds.
• Do not touch the throttle or accelerate the saw during this time.
• After 90 seconds, the machine should be switched off
• Your saw is now re-calibrated and ready to use.

Husqvarna 565 Workshop Manual PDF

* Online preview