Stihl 011 Workshop Manual

$0.00

Stihl 011 Service Workshop Manual for the 011 chainsaws. View free page images online or download full PDF with images, diagrams and information. Print or save to any suitable device.
Download PDF Manual

Stihl 011 Service Workshop Manual Repair

Stihl 011 Service Workshop Manual for the Repair and service of 011 chainsaws. The PDF manual has diagrams and detailed information to troubleshoot and repair the chainsaw. View free page images online or download a full digital PDF that you can easily save, print or view on all devices.

Stihl 011 Chainsaw Repair

Stihl 011 Service Manual to repair the Stihl 011 chainsaw.

Stihl 011 was made between the years of 1980 – 1993. It is a lightweight saw which is suitable for most jobs around the house and garden. It comes in various versions AV, AVT. They’re not too fiddly to fix, the carb is a bit picky, and the flap that seals up the choke seems to bend – so it is very hard to start from cold (you think the choke is on, but it isn’t), and runs fine when hot. The plug hangs out the back, so is vulnerable to having the lead knocked off.

It is in a pdf format which contains clear exploded diagrams to help you quickly find the part that you need to repair your Stihl 011 chainsaw.

Contents of Stihl 011 Service Manual

Introduction, Specifications, Clutch, Engine, Ignition system, Rewind starter, Throttle control, Fuel system, Carburettor, Av system, Shaft, Cutting tool drive, Support frame, Special servicing tools and aids.

Specifications

ENGINE DISPLACEMENT:
40.8 ccm (2.45 cu. in.)
NUMBER OF CYLINDERS:1
CYLINDER BORE:38 mm (1.50 in.)
PISTON STROKE:36 mm (1.42 in.)
CYLINDER TYPE: Aluminum with a chrome-plated bore
INTAKE METHOD: Piston ported
WEIGHT:9.7 lbs.
HANDLEBAR SYSTEM: Anti-vibration
CHAIN BRAKE: Optional on Q model
CLUTCH: Centrifugal
DRIVE TYPE: Direct
CONSTRUCTION: Injection molded polymer, die-cast magnesium
MAGNETO TYPE: Flywheel magneto
CARBURETOR:
AIR FILTER SYSTEM: Felt element
STARTER TYPE: Automatic rewind
OIL PUMP:Automatic, diaphragm & plunger type
IGNITION TIMING:1.8 to 2.1 mm (0.071 to 0.83 in.) before TDC
BREAKER POINT SETTING:0.3 to 0.4 mm (0.012 to 0.016 in.)
FLYWHEEL/COIL AIR GAP:0.2 mm (0.008 in.)
SPARK PLUG TYPE: Bosch WSR6F, Champion RCJ7Y
SPARK PLUG GAP:0.51 mm (0.020 in.)
CRANKSHAFT MAIN BEARINGS: Caged needle roller
FUEL OIL RATIO:40:1 with Stihl oil
RECOMMENDED FUEL OCTANE: Regular grade
MIX OIL SPECIFICATION: Stihl two-cycle chain saw mix oil
CHAIN PITCH:3/8 in. low profile “Pico”
CHAIN TYPE: Stihl Pico
SHORTEST GUIDE BAR SUPPLIED:30 cm (12 in.)
LONGEST GUIDE BAR SUPPLIED:40 cm (16 in.)

Stihl 011 Service Workshop Manual PDF

* Online preview

Reviews

There are no reviews yet.

Be the first to review “Stihl 011 Workshop Manual”

Your email address will not be published. Required fields are marked *