Stihl 075 AV Chainsaw Specifications
Stihl 075 AV Specifications for the Stihl 075AV chainsaw. Find detailed specs information for the Stihl chainsaw including engine, fuel system, Carburetor, ignition system, chain lubrication,Torque settings and cutting attachments.
Stihl 075 AV Chainsaw Specs
ENGINE DISPLACEMENT: 111ccm (6.77 cu. in.)
CYLINDER BORE: 58mm (2.322 in.)
PISTON STROKE: 42mm (1.68 in.)
CYLINDER TYPE: Aluminum with chrome plated bore
INTAKE METHOD: Piston ported
MANUFACTURER ADVERTISED H.P.: 7.0 H.P. max @7,000rpm.
WEIGHT: 11.7kg with 53cm bar & chain and 25.5 Lbs. with 21 in. bar & chain
HANDLEBAR SYSTEM: Anti-vibration
CHAIN BRAKE: none
CLUTCH: Centrifugal
DRIVE TYPE: Direct
CONSTRUCTION: Die cast magnesium
MAGNETO TYPE: Bosch electronic
CARBURETOR: Tillotson HS-60C series
MAJOR REPAIR KIT: RK-21HS
MINOR REPAIR KIT: DG-HS/T
AIR FILTER SYSTEM: Nylon mesh cartridge
STARTER TYPE: Stihl automatic rewind. Engine has decompressor valve
OIL PUMP: Automatic with manual assist
MAXIMUM ENGINE RPM: 10,000rpm
IGNITION TIMING: fixed
BREAKER POINT SETTING: none
SPARK PLUG TYPE: Bosch WSR6F
SPARK PLUG GAP: 0.63mm (0.025 in.)
CRANKSHAFT MAIN BEARINGS: Ball
FUEL TANK CAPACITY: 1.2 litres
FUEL OIL RATIO: 40:1 with Stihl chain saw mix oil
RECOMMENDED FUEL OCTANE: Regular
MIX OIL SPECIFICATION: Stihl two-cycle chain saw mix oil
CHAIN PITCH: .404 in.
CHAIN TYPE: Stihl or alternative brand
SHORTEST GUIDE BAR SUPPLIED:
53cm (21 in.)
LONGEST GUIDE BAR SUPPLIED:
90cm (36 in.)
Later models had full wrap bars and models had chain brakes, often was used for logging.
Stihl 075 AV Specifications Carburetor
Replace carburetor with Tillotson carb: Model HS-60D
Piston Ring Size: Piston Ring (52mm x 1.5mm)
Replace spark plug with Bosch WSR6F, Champion RCJ6Y and NGK BPMR7A.
Covers all models and dates of manufacture (which was only a few years!).
Stihl 075 AV Specifications information can be found in Carburetor Manuals HERE and a Stihl 075AV chainsaw workshop manual HERE. Stihl Parts list HERE a chainsaw search (magnifier icon) at top and bottom of this page, as well as a chainsaw repair help question and answer page HERE.
just wanted to confirm that I can use 40 to 1 gas / oil mix. Seems like this saw called for 24 to 1 or 32 to 1 when I got it back in the 80’s.