The Husqvarna 49 chainsaw was introduced by Husqvarna Vapenfabriks AB of Huskvarna, Sweden in 1996. With an engine displacement of 49ccm (3.0 cu. in.) and a cylinder bore of 44mm (1.73 in.), this saw was a powerful and reliable tool for professionals and homeowners alike. Featuring an aluminum cylinder with a chrome-plated bore and a piston-ported intake method, the 49 was built to last.
Weighing in at 4.9 kg (powerhead only) and equipped with an anti-vibration handlebar system, an inertia-activated chain brake, and a centrifugal clutch, the 49 was easy to handle and safe to operate. With a direct drive type and construction that combined injection molded polymer with die-cast magnesium, the 49 was built to withstand tough conditions.
The saw was equipped with an automatic oil pump and could reach a maximum engine RPM of 12,500 (with bar and chain installed). The Husqvarna 49 chainsaw is no longer in production, but it remains a favorite among collectors and enthusiasts for its durability, power, and quality craftsmanship.
Specifications Chart
| Specification | Details |
|---|---|
| Manufactured by | Husqvarna Vapenfabriks AB, Huskvarna, Sweden |
| Year Introduced | 1996 |
| Year Discontinued | N/A |
| Engine Displacement | 49ccm (3.0 cu. in.) |
| Cylinder Bore | 44 mm (1.73 in.) |
| Piston Stroke | 32 mm (1.26 in.) |
| Cylinder Type | Aluminum with Chrome Plated Bore |
| Intake Method | Piston Ported |
| Weight | 4.9 kg powerhead only |
| Handlebar System | Anti-vibration |
| Chain Brake | Inertia Activated |
| Clutch | Centrifugal |
| Drive Type | Direct |
| Construction | Injection Molded Polymer, Die Cast Magnesium |
| Magneto Type | Electronic |
| Carburetor | Walbro WT Series, Zama C1Q-EL1, C1Q-EL5 |
| Major Repair Kit | K10-WAT for Walbro, RB-45 for Zama |
| Minor Repair Kit | D10-WAT for Walbro, GND-33 for Zama |
| Air Filter System | Nylon Mesh Cartridge |
| Starter Type | Automatic Rewind |
| Oil Pump | Automatic |
| Maximum Engine RPM | 12,500 max free with bar and chain installed |
| Idle RPM | 2,500 |
| Ignition Timing | Fixed |
| Breaker Point Setting | None |
| Flywheel/Coil Air Gap | 0.30 mm (0.012 in.) |
| Spark Plug Type | Bosch WSR7F/WS7F, NGK BPMR7A, Champion RCJ7Y |
| Spark Plug Gap | 0.50 mm (0.020 in.) |
| Crankshaft Main Bearings | Ball |
| Fuel Tank Capacity | 500 ml (16.9 fl. oz.) |
| Fuel Oil Ratio | 50:1 |
| Recommended Fuel Octane | Regular Grade |
| Mix Oil Specification | Electrolux Approved Oil, Husqvarna Mix Oil |
| Chain Pitch | .325 in. |
| Bar Mount Pattern | 01 Link |
| Shortest Guide Bar Supplied | 33 cm (13 in.) |
| Longest Guide Bar Supplied | 45 cm (18 in.) |
| Color Scheme | Husqvarna Orange |
| Illustrated Parts List | Yes |
| Service Manual | Yes |
In conclusion, the Husqvarna 49 chainsaw was a reliable and efficient tool manufactured by Husqvarna Vapenfabriks AB in Huskvarna, Sweden. Introduced in 1996 and no longer in production, this chainsaw boasted a powerful 49ccm engine with a 44 mm cylinder bore and a 32 mm piston stroke.
The chainsaw had an anti-vibration handlebar system, an inertia-activated chain brake, a centrifugal clutch, and a direct drive type. Its construction featured an injection-molded polymer and a die-cast magnesium, making it lightweight at 4.9 kg for the powerhead only.
With an automatic oil pump and a nylon mesh cartridge air filter system, this chainsaw required minimal maintenance. It is a testament to Husqvarna’s commitment to creating high-quality and durable tools for professionals and DIY enthusiasts alike.